{"title":"Pressure Washers","description":"","products":[{"product_id":"pressure-washer-14l-min-220v-2-2kw-electric","title":"Pressure Washer, 14L\/min,220V 2.2kW Electric","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA 2.2kW high-pressure washer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e2.2kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e230V Single phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRevolutions:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e1450RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax. Pressure:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e100 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e14.0 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUsage:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine must be switched off when not in use. If the gun is released and the pump enters its unloading state, the machine can only facilitate this for 30 seconds before the water starts overheating and ultimately damaging the pump. If any damage comes to the pump from deformation or destruction of internal components, overheating is the likely cause.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine comes with a \u003c\/span\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11131R\"\u003eRed Gun\u003c\/a\u003e\u003cspan\u003e, a 7m 280bar high-pressure hose, a short hose, a low-pressure chemical injector, and the following nozzles:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139R\"\u003eRed nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139Y\"\u003eYellow nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139W\"\u003eWhite nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139K\"\u003eBlack nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eWARNING\u003c\/h1\u003e\n\u003ch2\u003e\"MUST DO\"\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll electrical conductors MUST BE PROTECTED against the water jet.\u003c\/li\u003e\n\u003cli\u003eThe appliance MUST ONLY BE CONNECTED to a correct earthed power supply.\u003cbr\u003eTIP: Use of Safety Residual Current Circuit-breaker(r.c.c.b) will provide additional protection for the operator(30mA).\u003c\/li\u003e\n\u003cli\u003eThe high pressure jet may cause loose particles to be propelled at high speed, therefor protective clothing and safety glasses MUST BE WORN.\u003c\/li\u003e\n\u003cli\u003eBefore carrying out any work on the cleaner, DISCONNECT the plug from the electrical supply socket.\u003c\/li\u003e\n\u003cli\u003eBefore pressing the trigger, GRIP the gun firmly to counteract the recoil.\u003c\/li\u003e\n\u003cli\u003eMaintenance and repair of electrical components MUST be done by a qualified staff.\u003c\/li\u003e\n\u003cli\u003eDISCHARGE residual pressure before disconnecting the high pressure hose.\u003c\/li\u003e\n\u003cli\u003eBefore using the appliance, CHECK every time that the screws are fully tightened and that there are no broken or worn parts.\u003c\/li\u003e\n\u003cli\u003eOnly use detergents which will not corrode the coating materials of the machine and it's parts. DO NOT USE bleach, alcohol, petrol, hydrochloric acid etc. as the solvents that are flammable and erodable.\u003c\/li\u003e\n\u003cli\u003eThe appliance operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result is amputation or serious injury. DO NOT TREAT FLUID INJECTIONS AS A SAMPLE CUT! SEE DOCTOR IMMEDIATELY!\u003c\/li\u003e\n\u003cli\u003eOnly use chemicals desighed for pressure washer using mild soaps and chemicals compatible with aluminium and brass parts of the pressure washer.\u003c\/li\u003e\n\u003cli\u003eThe machine uses normal temperature and the temperature for the inlet should not be used with the temperature of 0°C or under 0°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\"MUST NOT DO\"\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use the appliance with inflammable or toxic liquid, or any products which are not compatible with the correct operation of the cleaner.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance within range of persons unless protective clothing are worn.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance if supply cord or important parts of the appliance are damaged, e.g. safety devices, high pressure hoses, trigger gun.\u003c\/li\u003e\n\u003cli\u003eDo not direct the water jet towards people, animals, electrical equipment or the machine itself.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance outdoors in case of rain.\u003c\/li\u003e\n\u003cli\u003eDo not allow children or unprofessional staff to use the machine.\u003c\/li\u003e\n\u003cli\u003eDo not though the plug or socket with wet hands.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance if electrical cord is damaged.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance if the high pressure hose is damaged.\u003c\/li\u003e\n\u003cli\u003eDo not jam the trigger in the operating position.\u003c\/li\u003e\n\u003cli\u003eDo not with or alter the calibration of the safety valve.\u003c\/li\u003e\n\u003cli\u003eDo not alter the original diameter of the spray nozzle.\u003c\/li\u003e\n\u003cli\u003eDo not leave the appliance unattended.\u003c\/li\u003e\n\u003cli\u003eDo not move the appliance by pulling the electrical cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003ePUMP OPERATING FEATURES\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003ePlease check each part according to the packing list when opening the carton, to check whether the parts are complete and in good condition. Keep all documents and manuals.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eCHANGE OIL INLET PLUG\u003c\/h2\u003e\n\u003cp\u003eThe red plug on the pump is specially designed for transportation, before using the unit, please replace the red plug with the yellow plug or the brass plug in the spare parts package.\u003c\/p\u003e\n\u003ch2\u003ePRESSURE REGULATOR\u003c\/h2\u003e\n\u003cp\u003eThe pressure setting is preset at the factory to achieve optimum pressure and cleaning. If need to lower the pressure, the following methods can be used:\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cb\u003eBack away from the surface to be cleaned.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe further away the user is, the less pressure is on the surface to be cleaned.\u003cbr\u003eDO NOT try to increase pump pressure, a higher pressure setting may damage the pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eChange to the 40° white nozzle.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThis nozzle delivers a less powerful stream of water and a wider spray pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjust the pressure regulator on the pump.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eTurn the pressure regulator knob anti-clockwise to lower the pressure. Once you have finished using your pressure washer, return the pressure regulator to it's original position by turning it clockwise.\u003cbr\u003eDO NOT try to turn pressure regulator knob past the build-in stop line otherwise damage to the pump may be resulted.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTYPE OF NOZZLE\u003c\/h2\u003e\n\u003cp\u003eYour unit is equipped with four spray nozzles. Each nozzle is colour coded, and delivers a specific spray pattern for a particular cleaning purpose.\u003c\/p\u003e\n\u003col\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRed:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e0° nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eYellow:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e15° nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhite:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e40° nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlack:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003eChemical nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThis high pressure spray from your unit is capable of causing damage to surfaces suck as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eCHANGING NOZZLES\u003c\/h2\u003e\n\u003cp\u003eDO NOT attempt to change the nozzle while the unit is running.\u003cbr\u003eTurn the engine or gun OFF before changing the nozzle.\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003ePull quick-release back and insert nozzle.\u003c\/li\u003e\n\u003cli\u003eRelease quick-release and\u003cb\u003e\u003cspan\u003e \u003c\/span\u003etwist nozzle to make sure it is secure in quick-release socket.\u003c\/b\u003e\u003cbr\u003eRisk of injury. Ensure nozzle is completely inserted in quick-release socket before turning on gun trigger.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCONNECTION TO ELECTRICAL SUPPLY\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMake sure that the mains voltage is the same as shown on the identification label on the identification label on the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eMake sure that the plug complies with your local regulations, and it is provided with ground connection (earth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe power outlet must be protected by a residual circuit breaker with a sensitivity of less than 30mA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eDo not connect other appliances to the same outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eInsert the plug after checking the switch joint the machine in the OFF position.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSTARTING THE MACHINE\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e In case of power failure, turn the unit OFF for safety reasons.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply water to the machine, then press the gun trigger\u003c\/li\u003e\n\u003cli\u003eSwitch on the unit.\u003c\/li\u003e\n\u003cli\u003eHold the gun in the open position for a few seconds to drain the air from the hose.\u003c\/li\u003e\n\u003cli\u003eAt this stage, adjust the machine pressure to your pressure requirement and you are ready to enjoy your work.\u003c\/li\u003e\n\u003cli\u003eDuring washing, it is better not to exceed the recommended pressure.\u003c\/li\u003e\n\u003cli\u003eDuring washing, the spray head should not be far away from the dirty surface.\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eDo not use the machine when people or animals are in range of the jet.\u003c\/b\u003e\u003cbr\u003eStop the gun after ending the washing, then switch the engine off. Do not let the unit run with the gun switched off for more than 2 minutes. The unloading valve is still moving agter stopping the gun, the water will flow in circle in the pump, which will make the water hot and damage the seal ring, ceramics or other accessories if the machine is kept running.\u003c\/li\u003e\n\u003cli\u003eDuring the operation, it is normal if there is a little water leaks out from the pump, which will not effect the use of the machine.\u003c\/li\u003e\n\u003cli\u003eSAFETY VALVE: The safety valve also functions as a pressure limiting valve. When the gun trigger is released, the safety valve opens and the water recirculate through the pump inlet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSTOPPING THE MACHINE\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eWhen not in use, switch the machine off.\u003c\/li\u003e\n\u003cli\u003eHold the gun in the open position for a few seconds to drain water from the hose.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003eHigh pressure water jets are potentially dangerous is used incorrectly. In particular, DO NOT direct the water jet towards people or animals, electrical equipment or the unit itself.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003eAPPLICATION FIELD\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eTo maintain and wash the deversified vehicles, project machinery, architecture and agricultural machinery.\u003c\/li\u003e\n\u003cli\u003eTo maintain and wash the army vehicles, tanks, naval vesssels, planes, and other military machinery.\u003c\/li\u003e\n\u003cli\u003eWash and disinfect the diver sited harbour containers.\u003c\/li\u003e\n\u003cli\u003eWash sanitation recovery and disinfection at stock farm, breeding house and slaughterhouse.\u003c\/li\u003e\n\u003cli\u003eDaily wash of buildings glass and the outside walls.\u003c\/li\u003e\n\u003cli\u003eWash and disinfect the enviroment of townsfolk square, carnie, hospitals, hotels, restaurants and the courtyard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003ePUMP OPERATING FEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eThe level of the oil must be checked periodically.\u003c\/li\u003e\n\u003cli\u003eIt is most important that the oil is changed after the first 50 hours of work and successively every 100 hous.\u003c\/li\u003e\n\u003cli\u003eIn any case we suggest to change the oil at least once a year.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eOIL TYPE: SAE 15W-40 or equivalent motor oil.\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow to change pump oil:\u003c\/b\u003e\u003cbr\u003eDrain the old pump il completely through the oil outlet plug.\u003cbr\u003eInstall the oil outlet plug again and pour the clean oil in the crankcase, the oil level should be slightly over the center line of the oil mirror.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eTROUBLE SHOOTING\u003c\/h1\u003e\n\u003ch3\u003eFOR QUALIFIED PERSONNEL ONLY\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003ePump running normally but pressure does not achieve rated values.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump sucking air\u003c\/li\u003e\n\u003cli\u003eValve worn or dirty\u003c\/li\u003e\n\u003cli\u003eWorn Out Unloader valve\u003c\/li\u003e\n\u003cli\u003eWorn out piston seals\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that hoses and fittings are air tight\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eFluctuating pressure\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eValves worn, dirty or stuck\u003c\/li\u003e\n\u003cli\u003ePump sucking air\u003c\/li\u003e\n\u003cli\u003eDamaged or dirty Check Valves\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck that hoses and fittings are air tight\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003ePressure drops after period of normal use.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorn Nozzle\u003c\/li\u003e\n\u003cli\u003eCheck Valve is worn, dirty or stuck\u003c\/li\u003e\n\u003cli\u003eWorn Out Unloader valve\u003c\/li\u003e\n\u003cli\u003eWorn out piston seals\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003ePump is noisy.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump sucking air\u003c\/li\u003e\n\u003cli\u003eValve worn, dirty or stuck\u003c\/li\u003e\n\u003cli\u003eWorn Out bearings\u003c\/li\u003e\n\u003cli\u003eWater Top hot\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that hoses and fittings are air tight\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace if necessary\u003c\/li\u003e\n\u003cli\u003eReduce Temperature\u003c\/li\u003e\n\u003cli\u003eCheck and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eWater in oil.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh humidity in air\u003c\/li\u003e\n\u003cli\u003ePiston seal or oil seal worn out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and change oil twice as often\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eWater dripping from under the pump.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePiston seals damaged or worn out\u003c\/li\u003e\n\u003cli\u003eThe O-ring of piston guide or retainer worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and Replace\u003c\/li\u003e\n\u003cli\u003eCheck and Replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eOil leaking.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOil seal worn out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and Replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eThe motor does not start when switched on.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe plug not well connected or lack of power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck plug, cable and switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eWhen switching the unit on, the motor turns but does not run.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe mains voltage is insufficient, lower than the minimum requirement\u003c\/li\u003e\n\u003cli\u003eThe pump is stuck or frozen\u003c\/li\u003e\n\u003cli\u003eIncorrect extension cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the main power supply is adequate\u003c\/li\u003e\n\u003cli\u003eFollow the correct precautions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eThe motor stops running.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTripped internal overload due to overheating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the main voltage corresponds to the specifications\u003c\/li\u003e\n\u003cli\u003eWait a few minutes before turning on the unit again\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scrubio Cleaning","offers":[{"title":"Default Title","offer_id":52725009613073,"sku":null,"price":13200.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/2358\/7857\/files\/1_68828ae6-8c29-458d-be9f-09ce135535ce.png?v=1763083343"},{"product_id":"pressure-washer-13-2l-min-380v-5-5kw","title":"Pressure Washer, 13.2L\/min, 380V 5.5kW, Electric","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA 5.5kW high-pressure washer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e5.5kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e380V Three phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRevolutions:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e1450RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax. Pressure:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e200 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e13.2 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUsage:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine must be switched off when not in use. If the gun is released and the pump enters its unloading state, the machine can only facilitate this for 30 seconds before the water starts overheating and ultimately damaging the pump. If any damage comes to the pump from deformation or destruction of internal components, overheating is the likely cause.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine comes with a \u003c\/span\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11131R\"\u003eRed Gun\u003c\/a\u003e\u003cspan\u003e, a 7m 280bar high-pressure hose, a short hose, a low-pressure chemical injector, and the following nozzles:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139R\"\u003eRed nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139Y\"\u003eYellow nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139W\"\u003eWhite nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139K\"\u003eBlack nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eWARNING\u003c\/h1\u003e\n\u003ch2\u003e\"MUST DO\"\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll electrical conductors MUST BE PROTECTED against the water jet.\u003c\/li\u003e\n\u003cli\u003eThe appliance MUST ONLY BE CONNECTED to a correct earthed power supply.\u003cbr\u003eTIP: Use of Safety Residual Current Circuit-breaker(r.c.c.b) will provide additional protection for the operator(30mA).\u003c\/li\u003e\n\u003cli\u003eThe high pressure jet may cause loose particles to be propelled at high speed, therefor protective clothing and safety glasses MUST BE WORN.\u003c\/li\u003e\n\u003cli\u003eBefore carrying out any work on the cleaner, DISCONNECT the plug from the electrical supply socket.\u003c\/li\u003e\n\u003cli\u003eBefore pressing the trigger, GRIP the gun firmly to counteract the recoil.\u003c\/li\u003e\n\u003cli\u003eMaintenance and repair of electrical components MUST be done by a qualified staff.\u003c\/li\u003e\n\u003cli\u003eDISCHARGE residual pressure before disconnecting the high pressure hose.\u003c\/li\u003e\n\u003cli\u003eBefore using the appliance, CHECK every time that the screws are fully tightened and that there are no broken or worn parts.\u003c\/li\u003e\n\u003cli\u003eOnly use detergents which will not corrode the coating materials of the machine and it's parts. DO NOT USE bleach, alcohol, petrol, hydrochloric acid etc. as the solvents that are flammable and erodable.\u003c\/li\u003e\n\u003cli\u003eThe appliance operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result is amputation or serious injury. DO NOT TREAT FLUID INJECTIONS AS A SAMPLE CUT! SEE DOCTOR IMMEDIATELY!\u003c\/li\u003e\n\u003cli\u003eOnly use chemicals desighed for pressure washer using mild soaps and chemicals compatible with aluminium and brass parts of the pressure washer.\u003c\/li\u003e\n\u003cli\u003eThe machine uses normal temperature and the temperature for the inlet should not be used with the temperature of 0°C or under 0°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\"MUST NOT DO\"\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use the appliance with inflammable or toxic liquid, or any products which are not compatible with the correct operation of the cleaner.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance within range of persons unless protective clothing are worn.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance if supply cord or important parts of the appliance are damaged, e.g. safety devices, high pressure hoses, trigger gun.\u003c\/li\u003e\n\u003cli\u003eDo not direct the water jet towards people, animals, electrical equipment or the machine itself.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance outdoors in case of rain.\u003c\/li\u003e\n\u003cli\u003eDo not allow children or unprofessional staff to use the machine.\u003c\/li\u003e\n\u003cli\u003eDo not though the plug or socket with wet hands.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance if electrical cord is damaged.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance if the high pressure hose is damaged.\u003c\/li\u003e\n\u003cli\u003eDo not jam the trigger in the operating position.\u003c\/li\u003e\n\u003cli\u003eDo not with or alter the calibration of the safety valve.\u003c\/li\u003e\n\u003cli\u003eDo not alter the original diameter of the spray nozzle.\u003c\/li\u003e\n\u003cli\u003eDo not leave the appliance unattended.\u003c\/li\u003e\n\u003cli\u003eDo not move the appliance by pulling the electrical cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003ePUMP OPERATING FEATURES\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003ePlease check each part according to the packing list when opening the carton, to check whether the parts are complete and in good condition. Keep all documents and manuals.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eCHANGE OIL INLET PLUG\u003c\/h2\u003e\n\u003cp\u003eThe red plug on the pump is specially designed for transportation, before using the unit, please replace the red plug with the yellow plug or the brass plug in the spare parts package.\u003c\/p\u003e\n\u003ch2\u003ePRESSURE REGULATOR\u003c\/h2\u003e\n\u003cp\u003eThe pressure setting is preset at the factory to achieve optimum pressure and cleaning. If need to lower the pressure, the following methods can be used:\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cb\u003eBack away from the surface to be cleaned.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe further away the user is, the less pressure is on the surface to be cleaned.\u003cbr\u003eDO NOT try to increase pump pressure, a higher pressure setting may damage the pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eChange to the 40° white nozzle.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThis nozzle delivers a less powerful stream of water and a wider spray pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjust the pressure regulator on the pump.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eTurn the pressure regulator knob anti-clockwise to lower the pressure. Once you have finished using your pressure washer, return the pressure regulator to it's original position by turning it clockwise.\u003cbr\u003eDO NOT try to turn pressure regulator knob past the build-in stop line otherwise damage to the pump may be resulted.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTYPE OF NOZZLE\u003c\/h2\u003e\n\u003cp\u003eYour unit is equipped with four spray nozzles. Each nozzle is colour coded, and delivers a specific spray pattern for a particular cleaning purpose.\u003c\/p\u003e\n\u003col\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRed:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e0° nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eYellow:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e15° nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhite:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e40° nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlack:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003eChemical nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThis high pressure spray from your unit is capable of causing damage to surfaces suck as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eCHANGING NOZZLES\u003c\/h2\u003e\n\u003cp\u003eDO NOT attempt to change the nozzle while the unit is running.\u003cbr\u003eTurn the engine or gun OFF before changing the nozzle.\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003ePull quick-release back and insert nozzle.\u003c\/li\u003e\n\u003cli\u003eRelease quick-release and\u003cb\u003e\u003cspan\u003e \u003c\/span\u003etwist nozzle to make sure it is secure in quick-release socket.\u003c\/b\u003e\u003cbr\u003eRisk of injury. Ensure nozzle is completely inserted in quick-release socket before turning on gun trigger.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCONNECTION TO ELECTRICAL SUPPLY\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMake sure that the mains voltage is the same as shown on the identification label on the identification label on the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eMake sure that the plug complies with your local regulations, and it is provided with ground connection (earth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe power outlet must be protected by a residual circuit breaker with a sensitivity of less than 30mA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eDo not connect other appliances to the same outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eInsert the plug after checking the switch joint the machine in the OFF position.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSTARTING THE MACHINE\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e In case of power failure, turn the unit OFF for safety reasons.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply water to the machine, then press the gun trigger\u003c\/li\u003e\n\u003cli\u003eSwitch on the unit.\u003c\/li\u003e\n\u003cli\u003eHold the gun in the open position for a few seconds to drain the air from the hose.\u003c\/li\u003e\n\u003cli\u003eAt this stage, adjust the machine pressure to your pressure requirement and you are ready to enjoy your work.\u003c\/li\u003e\n\u003cli\u003eDuring washing, it is better not to exceed the recommended pressure.\u003c\/li\u003e\n\u003cli\u003eDuring washing, the spray head should not be far away from the dirty surface.\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eDo not use the machine when people or animals are in range of the jet.\u003c\/b\u003e\u003cbr\u003eStop the gun after ending the washing, then switch the engine off. Do not let the unit run with the gun switched off for more than 2 minutes. The unloading valve is still moving agter stopping the gun, the water will flow in circle in the pump, which will make the water hot and damage the seal ring, ceramics or other accessories if the machine is kept running.\u003c\/li\u003e\n\u003cli\u003eDuring the operation, it is normal if there is a little water leaks out from the pump, which will not effect the use of the machine.\u003c\/li\u003e\n\u003cli\u003eSAFETY VALVE: The safety valve also functions as a pressure limiting valve. When the gun trigger is released, the safety valve opens and the water recirculate through the pump inlet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSTOPPING THE MACHINE\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eWhen not in use, switch the machine off.\u003c\/li\u003e\n\u003cli\u003eHold the gun in the open position for a few seconds to drain water from the hose.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003eHigh pressure water jets are potentially dangerous is used incorrectly. In particular, DO NOT direct the water jet towards people or animals, electrical equipment or the unit itself.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003eAPPLICATION FIELD\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eTo maintain and wash the deversified vehicles, project machinery, architecture and agricultural machinery.\u003c\/li\u003e\n\u003cli\u003eTo maintain and wash the army vehicles, tanks, naval vesssels, planes, and other military machinery.\u003c\/li\u003e\n\u003cli\u003eWash and disinfect the diver sited harbour containers.\u003c\/li\u003e\n\u003cli\u003eWash sanitation recovery and disinfection at stock farm, breeding house and slaughterhouse.\u003c\/li\u003e\n\u003cli\u003eDaily wash of buildings glass and the outside walls.\u003c\/li\u003e\n\u003cli\u003eWash and disinfect the enviroment of townsfolk square, carnie, hospitals, hotels, restaurants and the courtyard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003ePUMP OPERATING FEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eThe level of the oil must be checked periodically.\u003c\/li\u003e\n\u003cli\u003eIt is most important that the oil is changed after the first 50 hours of work and successively every 100 hous.\u003c\/li\u003e\n\u003cli\u003eIn any case we suggest to change the oil at least once a year.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eOIL TYPE: SAE 15W-40 or equivalent motor oil.\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow to change pump oil:\u003c\/b\u003e\u003cbr\u003eDrain the old pump il completely through the oil outlet plug.\u003cbr\u003eInstall the oil outlet plug again and pour the clean oil in the crankcase, the oil level should be slightly over the center line of the oil mirror.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eTROUBLE SHOOTING\u003c\/h1\u003e\n\u003ch3\u003eFOR QUALIFIED PERSONNEL ONLY\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003ePump running normally but pressure does not achieve rated values.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump sucking air\u003c\/li\u003e\n\u003cli\u003eValve worn or dirty\u003c\/li\u003e\n\u003cli\u003eWorn Out Unloader valve\u003c\/li\u003e\n\u003cli\u003eWorn out piston seals\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that hoses and fittings are air tight\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eFluctuating pressure\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eValves worn, dirty or stuck\u003c\/li\u003e\n\u003cli\u003ePump sucking air\u003c\/li\u003e\n\u003cli\u003eDamaged or dirty Check Valves\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck that hoses and fittings are air tight\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003ePressure drops after period of normal use.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorn Nozzle\u003c\/li\u003e\n\u003cli\u003eCheck Valve is worn, dirty or stuck\u003c\/li\u003e\n\u003cli\u003eWorn Out Unloader valve\u003c\/li\u003e\n\u003cli\u003eWorn out piston seals\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003ePump is noisy.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump sucking air\u003c\/li\u003e\n\u003cli\u003eValve worn, dirty or stuck\u003c\/li\u003e\n\u003cli\u003eWorn Out bearings\u003c\/li\u003e\n\u003cli\u003eWater Top hot\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that hoses and fittings are air tight\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace if necessary\u003c\/li\u003e\n\u003cli\u003eReduce Temperature\u003c\/li\u003e\n\u003cli\u003eCheck and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eWater in oil.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh humidity in air\u003c\/li\u003e\n\u003cli\u003ePiston seal or oil seal worn out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and change oil twice as often\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eWater dripping from under the pump.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePiston seals damaged or worn out\u003c\/li\u003e\n\u003cli\u003eThe O-ring of piston guide or retainer worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and Replace\u003c\/li\u003e\n\u003cli\u003eCheck and Replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eOil leaking.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOil seal worn out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and Replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eThe motor does not start when switched on.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe plug not well connected or lack of power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck plug, cable and switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eWhen switching the unit on, the motor turns but does not run.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe mains voltage is insufficient, lower than the minimum requirement\u003c\/li\u003e\n\u003cli\u003eThe pump is stuck or frozen\u003c\/li\u003e\n\u003cli\u003eIncorrect extension cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the main power supply is adequate\u003c\/li\u003e\n\u003cli\u003eFollow the correct precautions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eThe motor stops running.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTripped internal overload due to overheating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the main voltage corresponds to the specifications\u003c\/li\u003e\n\u003cli\u003eWait a few minutes before turning on the unit again\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scrubio Cleaning","offers":[{"title":"Default Title","offer_id":52725016232209,"sku":null,"price":17999.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/2358\/7857\/files\/2_2e47c47d-23b1-45e3-a27e-ac449a3e4b65.png?v=1763083647"},{"product_id":"pressure-washer-20l-min-380v-7-5kw","title":"Pressure Washer, 20L\/min, 3000 Psi, 380V 7.5kW, Electric","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA 7.5kW high-pressure washer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e7.5kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e380V Three phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRevolutions:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e1450RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax. Pressure:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e240 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e20.7 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUsage:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine must be switched off when not in use. If the gun is released and the pump enters its unloading state, the machine can only facilitate this for 30 seconds before the water starts overheating and ultimately damaging the pump. If any damage comes to the pump from deformation or destruction of internal components, overheating is the likely cause.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine comes with a \u003c\/span\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11131R\"\u003eRed Gun\u003c\/a\u003e\u003cspan\u003e, a 7m 280bar high-pressure hose, a short hose, a low-pressure chemical injector, and the following nozzles:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139R\"\u003eRed nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139Y\"\u003eYellow nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139W\"\u003eWhite nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139K\"\u003eBlack nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eWARNING\u003c\/h1\u003e\n\u003ch2\u003e\"MUST DO\"\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll electrical conductors MUST BE PROTECTED against the water jet.\u003c\/li\u003e\n\u003cli\u003eThe appliance MUST ONLY BE CONNECTED to a correct earthed power supply.\u003cbr\u003eTIP: Use of Safety Residual Current Circuit-breaker(r.c.c.b) will provide additional protection for the operator(30mA).\u003c\/li\u003e\n\u003cli\u003eThe high pressure jet may cause loose particles to be propelled at high speed, therefor protective clothing and safety glasses MUST BE WORN.\u003c\/li\u003e\n\u003cli\u003eBefore carrying out any work on the cleaner, DISCONNECT the plug from the electrical supply socket.\u003c\/li\u003e\n\u003cli\u003eBefore pressing the trigger, GRIP the gun firmly to counteract the recoil.\u003c\/li\u003e\n\u003cli\u003eMaintenance and repair of electrical components MUST be done by a qualified staff.\u003c\/li\u003e\n\u003cli\u003eDISCHARGE residual pressure before disconnecting the high pressure hose.\u003c\/li\u003e\n\u003cli\u003eBefore using the appliance, CHECK every time that the screws are fully tightened and that there are no broken or worn parts.\u003c\/li\u003e\n\u003cli\u003eOnly use detergents which will not corrode the coating materials of the machine and it's parts. DO NOT USE bleach, alcohol, petrol, hydrochloric acid etc. as the solvents that are flammable and erodable.\u003c\/li\u003e\n\u003cli\u003eThe appliance operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result is amputation or serious injury. DO NOT TREAT FLUID INJECTIONS AS A SAMPLE CUT! SEE DOCTOR IMMEDIATELY!\u003c\/li\u003e\n\u003cli\u003eOnly use chemicals desighed for pressure washer using mild soaps and chemicals compatible with aluminium and brass parts of the pressure washer.\u003c\/li\u003e\n\u003cli\u003eThe machine uses normal temperature and the temperature for the inlet should not be used with the temperature of 0°C or under 0°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\"MUST NOT DO\"\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use the appliance with inflammable or toxic liquid, or any products which are not compatible with the correct operation of the cleaner.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance within range of persons unless protective clothing are worn.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance if supply cord or important parts of the appliance are damaged, e.g. safety devices, high pressure hoses, trigger gun.\u003c\/li\u003e\n\u003cli\u003eDo not direct the water jet towards people, animals, electrical equipment or the machine itself.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance outdoors in case of rain.\u003c\/li\u003e\n\u003cli\u003eDo not allow children or unprofessional staff to use the machine.\u003c\/li\u003e\n\u003cli\u003eDo not though the plug or socket with wet hands.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance if electrical cord is damaged.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance if the high pressure hose is damaged.\u003c\/li\u003e\n\u003cli\u003eDo not jam the trigger in the operating position.\u003c\/li\u003e\n\u003cli\u003eDo not with or alter the calibration of the safety valve.\u003c\/li\u003e\n\u003cli\u003eDo not alter the original diameter of the spray nozzle.\u003c\/li\u003e\n\u003cli\u003eDo not leave the appliance unattended.\u003c\/li\u003e\n\u003cli\u003eDo not move the appliance by pulling the electrical cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003ePUMP OPERATING FEATURES\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003ePlease check each part according to the packing list when opening the carton, to check whether the parts are complete and in good condition. Keep all documents and manuals.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eCHANGE OIL INLET PLUG\u003c\/h2\u003e\n\u003cp\u003eThe red plug on the pump is specially designed for transportation, before using the unit, please replace the red plug with the yellow plug or the brass plug in the spare parts package.\u003c\/p\u003e\n\u003ch2\u003ePRESSURE REGULATOR\u003c\/h2\u003e\n\u003cp\u003eThe pressure setting is preset at the factory to achieve optimum pressure and cleaning. If need to lower the pressure, the following methods can be used:\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cb\u003eBack away from the surface to be cleaned.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe further away the user is, the less pressure is on the surface to be cleaned.\u003cbr\u003eDO NOT try to increase pump pressure, a higher pressure setting may damage the pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eChange to the 40° white nozzle.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThis nozzle delivers a less powerful stream of water and a wider spray pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjust the pressure regulator on the pump.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eTurn the pressure regulator knob anti-clockwise to lower the pressure. Once you have finished using your pressure washer, return the pressure regulator to it's original position by turning it clockwise.\u003cbr\u003eDO NOT try to turn pressure regulator knob past the build-in stop line otherwise damage to the pump may be resulted.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTYPE OF NOZZLE\u003c\/h2\u003e\n\u003cp\u003eYour unit is equipped with four spray nozzles. Each nozzle is colour coded, and delivers a specific spray pattern for a particular cleaning purpose.\u003c\/p\u003e\n\u003col\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRed:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e0° nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eYellow:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e15° nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhite:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e40° nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlack:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003eChemical nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThis high pressure spray from your unit is capable of causing damage to surfaces suck as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eCHANGING NOZZLES\u003c\/h2\u003e\n\u003cp\u003eDO NOT attempt to change the nozzle while the unit is running.\u003cbr\u003eTurn the engine or gun OFF before changing the nozzle.\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003ePull quick-release back and insert nozzle.\u003c\/li\u003e\n\u003cli\u003eRelease quick-release and\u003cb\u003e\u003cspan\u003e \u003c\/span\u003etwist nozzle to make sure it is secure in quick-release socket.\u003c\/b\u003e\u003cbr\u003eRisk of injury. Ensure nozzle is completely inserted in quick-release socket before turning on gun trigger.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCONNECTION TO ELECTRICAL SUPPLY\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMake sure that the mains voltage is the same as shown on the identification label on the identification label on the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eMake sure that the plug complies with your local regulations, and it is provided with ground connection (earth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe power outlet must be protected by a residual circuit breaker with a sensitivity of less than 30mA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eDo not connect other appliances to the same outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eInsert the plug after checking the switch joint the machine in the OFF position.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSTARTING THE MACHINE\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e In case of power failure, turn the unit OFF for safety reasons.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply water to the machine, then press the gun trigger\u003c\/li\u003e\n\u003cli\u003eSwitch on the unit.\u003c\/li\u003e\n\u003cli\u003eHold the gun in the open position for a few seconds to drain the air from the hose.\u003c\/li\u003e\n\u003cli\u003eAt this stage, adjust the machine pressure to your pressure requirement and you are ready to enjoy your work.\u003c\/li\u003e\n\u003cli\u003eDuring washing, it is better not to exceed the recommended pressure.\u003c\/li\u003e\n\u003cli\u003eDuring washing, the spray head should not be far away from the dirty surface.\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eDo not use the machine when people or animals are in range of the jet.\u003c\/b\u003e\u003cbr\u003eStop the gun after ending the washing, then switch the engine off. Do not let the unit run with the gun switched off for more than 2 minutes. The unloading valve is still moving agter stopping the gun, the water will flow in circle in the pump, which will make the water hot and damage the seal ring, ceramics or other accessories if the machine is kept running.\u003c\/li\u003e\n\u003cli\u003eDuring the operation, it is normal if there is a little water leaks out from the pump, which will not effect the use of the machine.\u003c\/li\u003e\n\u003cli\u003eSAFETY VALVE: The safety valve also functions as a pressure limiting valve. When the gun trigger is released, the safety valve opens and the water recirculate through the pump inlet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSTOPPING THE MACHINE\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eWhen not in use, switch the machine off.\u003c\/li\u003e\n\u003cli\u003eHold the gun in the open position for a few seconds to drain water from the hose.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003eHigh pressure water jets are potentially dangerous is used incorrectly. In particular, DO NOT direct the water jet towards people or animals, electrical equipment or the unit itself.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003eAPPLICATION FIELD\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eTo maintain and wash the deversified vehicles, project machinery, architecture and agricultural machinery.\u003c\/li\u003e\n\u003cli\u003eTo maintain and wash the army vehicles, tanks, naval vesssels, planes, and other military machinery.\u003c\/li\u003e\n\u003cli\u003eWash and disinfect the diver sited harbour containers.\u003c\/li\u003e\n\u003cli\u003eWash sanitation recovery and disinfection at stock farm, breeding house and slaughterhouse.\u003c\/li\u003e\n\u003cli\u003eDaily wash of buildings glass and the outside walls.\u003c\/li\u003e\n\u003cli\u003eWash and disinfect the enviroment of townsfolk square, carnie, hospitals, hotels, restaurants and the courtyard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003ePUMP OPERATING FEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eThe level of the oil must be checked periodically.\u003c\/li\u003e\n\u003cli\u003eIt is most important that the oil is changed after the first 50 hours of work and successively every 100 hous.\u003c\/li\u003e\n\u003cli\u003eIn any case we suggest to change the oil at least once a year.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eOIL TYPE: SAE 15W-40 or equivalent motor oil.\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow to change pump oil:\u003c\/b\u003e\u003cbr\u003eDrain the old pump il completely through the oil outlet plug.\u003cbr\u003eInstall the oil outlet plug again and pour the clean oil in the crankcase, the oil level should be slightly over the center line of the oil mirror.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eTROUBLE SHOOTING\u003c\/h1\u003e\n\u003ch3\u003eFOR QUALIFIED PERSONNEL ONLY\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003ePump running normally but pressure does not achieve rated values.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump sucking air\u003c\/li\u003e\n\u003cli\u003eValve worn or dirty\u003c\/li\u003e\n\u003cli\u003eWorn Out Unloader valve\u003c\/li\u003e\n\u003cli\u003eWorn out piston seals\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that hoses and fittings are air tight\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eFluctuating pressure\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eValves worn, dirty or stuck\u003c\/li\u003e\n\u003cli\u003ePump sucking air\u003c\/li\u003e\n\u003cli\u003eDamaged or dirty Check Valves\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck that hoses and fittings are air tight\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003ePressure drops after period of normal use.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorn Nozzle\u003c\/li\u003e\n\u003cli\u003eCheck Valve is worn, dirty or stuck\u003c\/li\u003e\n\u003cli\u003eWorn Out Unloader valve\u003c\/li\u003e\n\u003cli\u003eWorn out piston seals\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003ePump is noisy.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump sucking air\u003c\/li\u003e\n\u003cli\u003eValve worn, dirty or stuck\u003c\/li\u003e\n\u003cli\u003eWorn Out bearings\u003c\/li\u003e\n\u003cli\u003eWater Top hot\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that hoses and fittings are air tight\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace if necessary\u003c\/li\u003e\n\u003cli\u003eReduce Temperature\u003c\/li\u003e\n\u003cli\u003eCheck and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eWater in oil.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh humidity in air\u003c\/li\u003e\n\u003cli\u003ePiston seal or oil seal worn out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and change oil twice as often\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eWater dripping from under the pump.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePiston seals damaged or worn out\u003c\/li\u003e\n\u003cli\u003eThe O-ring of piston guide or retainer worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and Replace\u003c\/li\u003e\n\u003cli\u003eCheck and Replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eOil leaking.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOil seal worn out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and Replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eThe motor does not start when switched on.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe plug not well connected or lack of power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck plug, cable and switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eWhen switching the unit on, the motor turns but does not run.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe mains voltage is insufficient, lower than the minimum requirement\u003c\/li\u003e\n\u003cli\u003eThe pump is stuck or frozen\u003c\/li\u003e\n\u003cli\u003eIncorrect extension cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the main power supply is adequate\u003c\/li\u003e\n\u003cli\u003eFollow the correct precautions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eThe motor stops running.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTripped internal overload due to overheating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the main voltage corresponds to the specifications\u003c\/li\u003e\n\u003cli\u003eWait a few minutes before turning on the unit again\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scrubio Cleaning","offers":[{"title":"Default Title","offer_id":52725017575697,"sku":null,"price":19999.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/2358\/7857\/files\/3_3757ac1f-ae12-47e9-9a1d-071c81de53cc.png?v=1763084022"},{"product_id":"pressure-washer-14l-min-2500-psi-380v-4kw","title":"Pressure Washer, 14L\/min, 2500 Psi, 380V 4kW, Electric","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA 4.0kW high-pressure washer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e4.0kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e380V Three phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRevolutions:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e1450RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax. Pressure:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e175 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e14.0 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUsage:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine must be switched off when not in use. If the gun is released and the pump enters its unloading state, the machine can only facilitate this for 30 seconds before the water starts overheating and ultimately damaging the pump. If any damage comes to the pump from deformation or destruction of internal components, overheating is the likely cause.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine comes with a \u003c\/span\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11131R\"\u003eRed Gun\u003c\/a\u003e\u003cspan\u003e, a 7m 280bar high-pressure hose, a short hose, a low-pressure chemical injector, and the following nozzles:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139R\"\u003eRed nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139Y\"\u003eYellow nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139W\"\u003eWhite nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139K\"\u003eBlack nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eWARNING\u003c\/h1\u003e\n\u003ch2\u003e\"MUST DO\"\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll electrical conductors MUST BE PROTECTED against the water jet.\u003c\/li\u003e\n\u003cli\u003eThe appliance MUST ONLY BE CONNECTED to a correct earthed power supply.\u003cbr\u003eTIP: Use of Safety Residual Current Circuit-breaker(r.c.c.b) will provide additional protection for the operator(30mA).\u003c\/li\u003e\n\u003cli\u003eThe high pressure jet may cause loose particles to be propelled at high speed, therefor protective clothing and safety glasses MUST BE WORN.\u003c\/li\u003e\n\u003cli\u003eBefore carrying out any work on the cleaner, DISCONNECT the plug from the electrical supply socket.\u003c\/li\u003e\n\u003cli\u003eBefore pressing the trigger, GRIP the gun firmly to counteract the recoil.\u003c\/li\u003e\n\u003cli\u003eMaintenance and repair of electrical components MUST be done by a qualified staff.\u003c\/li\u003e\n\u003cli\u003eDISCHARGE residual pressure before disconnecting the high pressure hose.\u003c\/li\u003e\n\u003cli\u003eBefore using the appliance, CHECK every time that the screws are fully tightened and that there are no broken or worn parts.\u003c\/li\u003e\n\u003cli\u003eOnly use detergents which will not corrode the coating materials of the machine and it's parts. DO NOT USE bleach, alcohol, petrol, hydrochloric acid etc. as the solvents that are flammable and erodable.\u003c\/li\u003e\n\u003cli\u003eThe appliance operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result is amputation or serious injury. DO NOT TREAT FLUID INJECTIONS AS A SAMPLE CUT! SEE DOCTOR IMMEDIATELY!\u003c\/li\u003e\n\u003cli\u003eOnly use chemicals desighed for pressure washer using mild soaps and chemicals compatible with aluminium and brass parts of the pressure washer.\u003c\/li\u003e\n\u003cli\u003eThe machine uses normal temperature and the temperature for the inlet should not be used with the temperature of 0°C or under 0°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\"MUST NOT DO\"\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use the appliance with inflammable or toxic liquid, or any products which are not compatible with the correct operation of the cleaner.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance within range of persons unless protective clothing are worn.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance if supply cord or important parts of the appliance are damaged, e.g. safety devices, high pressure hoses, trigger gun.\u003c\/li\u003e\n\u003cli\u003eDo not direct the water jet towards people, animals, electrical equipment or the machine itself.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance outdoors in case of rain.\u003c\/li\u003e\n\u003cli\u003eDo not allow children or unprofessional staff to use the machine.\u003c\/li\u003e\n\u003cli\u003eDo not though the plug or socket with wet hands.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance if electrical cord is damaged.\u003c\/li\u003e\n\u003cli\u003eDo not use the appliance if the high pressure hose is damaged.\u003c\/li\u003e\n\u003cli\u003eDo not jam the trigger in the operating position.\u003c\/li\u003e\n\u003cli\u003eDo not with or alter the calibration of the safety valve.\u003c\/li\u003e\n\u003cli\u003eDo not alter the original diameter of the spray nozzle.\u003c\/li\u003e\n\u003cli\u003eDo not leave the appliance unattended.\u003c\/li\u003e\n\u003cli\u003eDo not move the appliance by pulling the electrical cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003ePUMP OPERATING FEATURES\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003ePlease check each part according to the packing list when opening the carton, to check whether the parts are complete and in good condition. Keep all documents and manuals.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eCHANGE OIL INLET PLUG\u003c\/h2\u003e\n\u003cp\u003eThe red plug on the pump is specially designed for transportation, before using the unit, please replace the red plug with the yellow plug or the brass plug in the spare parts package.\u003c\/p\u003e\n\u003ch2\u003ePRESSURE REGULATOR\u003c\/h2\u003e\n\u003cp\u003eThe pressure setting is preset at the factory to achieve optimum pressure and cleaning. If need to lower the pressure, the following methods can be used:\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cb\u003eBack away from the surface to be cleaned.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe further away the user is, the less pressure is on the surface to be cleaned.\u003cbr\u003eDO NOT try to increase pump pressure, a higher pressure setting may damage the pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eChange to the 40° white nozzle.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThis nozzle delivers a less powerful stream of water and a wider spray pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjust the pressure regulator on the pump.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eTurn the pressure regulator knob anti-clockwise to lower the pressure. Once you have finished using your pressure washer, return the pressure regulator to it's original position by turning it clockwise.\u003cbr\u003eDO NOT try to turn pressure regulator knob past the build-in stop line otherwise damage to the pump may be resulted.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTYPE OF NOZZLE\u003c\/h2\u003e\n\u003cp\u003eYour unit is equipped with four spray nozzles. Each nozzle is colour coded, and delivers a specific spray pattern for a particular cleaning purpose.\u003c\/p\u003e\n\u003col\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRed:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e0° nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eYellow:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e15° nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhite:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e40° nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlack:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003eChemical nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThis high pressure spray from your unit is capable of causing damage to surfaces suck as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eCHANGING NOZZLES\u003c\/h2\u003e\n\u003cp\u003eDO NOT attempt to change the nozzle while the unit is running.\u003cbr\u003eTurn the engine or gun OFF before changing the nozzle.\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003ePull quick-release back and insert nozzle.\u003c\/li\u003e\n\u003cli\u003eRelease quick-release and\u003cb\u003e\u003cspan\u003e \u003c\/span\u003etwist nozzle to make sure it is secure in quick-release socket.\u003c\/b\u003e\u003cbr\u003eRisk of injury. Ensure nozzle is completely inserted in quick-release socket before turning on gun trigger.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCONNECTION TO ELECTRICAL SUPPLY\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMake sure that the mains voltage is the same as shown on the identification label on the identification label on the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eMake sure that the plug complies with your local regulations, and it is provided with ground connection (earth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe power outlet must be protected by a residual circuit breaker with a sensitivity of less than 30mA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eDo not connect other appliances to the same outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eInsert the plug after checking the switch joint the machine in the OFF position.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSTARTING THE MACHINE\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e In case of power failure, turn the unit OFF for safety reasons.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply water to the machine, then press the gun trigger\u003c\/li\u003e\n\u003cli\u003eSwitch on the unit.\u003c\/li\u003e\n\u003cli\u003eHold the gun in the open position for a few seconds to drain the air from the hose.\u003c\/li\u003e\n\u003cli\u003eAt this stage, adjust the machine pressure to your pressure requirement and you are ready to enjoy your work.\u003c\/li\u003e\n\u003cli\u003eDuring washing, it is better not to exceed the recommended pressure.\u003c\/li\u003e\n\u003cli\u003eDuring washing, the spray head should not be far away from the dirty surface.\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eDo not use the machine when people or animals are in range of the jet.\u003c\/b\u003e\u003cbr\u003eStop the gun after ending the washing, then switch the engine off. Do not let the unit run with the gun switched off for more than 2 minutes. The unloading valve is still moving agter stopping the gun, the water will flow in circle in the pump, which will make the water hot and damage the seal ring, ceramics or other accessories if the machine is kept running.\u003c\/li\u003e\n\u003cli\u003eDuring the operation, it is normal if there is a little water leaks out from the pump, which will not effect the use of the machine.\u003c\/li\u003e\n\u003cli\u003eSAFETY VALVE: The safety valve also functions as a pressure limiting valve. When the gun trigger is released, the safety valve opens and the water recirculate through the pump inlet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSTOPPING THE MACHINE\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eWhen not in use, switch the machine off.\u003c\/li\u003e\n\u003cli\u003eHold the gun in the open position for a few seconds to drain water from the hose.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003eHigh pressure water jets are potentially dangerous is used incorrectly. In particular, DO NOT direct the water jet towards people or animals, electrical equipment or the unit itself.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003eAPPLICATION FIELD\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eTo maintain and wash the deversified vehicles, project machinery, architecture and agricultural machinery.\u003c\/li\u003e\n\u003cli\u003eTo maintain and wash the army vehicles, tanks, naval vesssels, planes, and other military machinery.\u003c\/li\u003e\n\u003cli\u003eWash and disinfect the diver sited harbour containers.\u003c\/li\u003e\n\u003cli\u003eWash sanitation recovery and disinfection at stock farm, breeding house and slaughterhouse.\u003c\/li\u003e\n\u003cli\u003eDaily wash of buildings glass and the outside walls.\u003c\/li\u003e\n\u003cli\u003eWash and disinfect the enviroment of townsfolk square, carnie, hospitals, hotels, restaurants and the courtyard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003ePUMP OPERATING FEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eThe level of the oil must be checked periodically.\u003c\/li\u003e\n\u003cli\u003eIt is most important that the oil is changed after the first 50 hours of work and successively every 100 hous.\u003c\/li\u003e\n\u003cli\u003eIn any case we suggest to change the oil at least once a year.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eOIL TYPE: SAE 15W-40 or equivalent motor oil.\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow to change pump oil:\u003c\/b\u003e\u003cbr\u003eDrain the old pump il completely through the oil outlet plug.\u003cbr\u003eInstall the oil outlet plug again and pour the clean oil in the crankcase, the oil level should be slightly over the center line of the oil mirror.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eTROUBLE SHOOTING\u003c\/h1\u003e\n\u003ch3\u003eFOR QUALIFIED PERSONNEL ONLY\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003ePump running normally but pressure does not achieve rated values.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump sucking air\u003c\/li\u003e\n\u003cli\u003eValve worn or dirty\u003c\/li\u003e\n\u003cli\u003eWorn Out Unloader valve\u003c\/li\u003e\n\u003cli\u003eWorn out piston seals\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that hoses and fittings are air tight\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eFluctuating pressure\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eValves worn, dirty or stuck\u003c\/li\u003e\n\u003cli\u003ePump sucking air\u003c\/li\u003e\n\u003cli\u003eDamaged or dirty Check Valves\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck that hoses and fittings are air tight\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003ePressure drops after period of normal use.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorn Nozzle\u003c\/li\u003e\n\u003cli\u003eCheck Valve is worn, dirty or stuck\u003c\/li\u003e\n\u003cli\u003eWorn Out Unloader valve\u003c\/li\u003e\n\u003cli\u003eWorn out piston seals\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003cli\u003eCheck and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003ePump is noisy.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump sucking air\u003c\/li\u003e\n\u003cli\u003eValve worn, dirty or stuck\u003c\/li\u003e\n\u003cli\u003eWorn Out bearings\u003c\/li\u003e\n\u003cli\u003eWater Top hot\u003c\/li\u003e\n\u003cli\u003eDirty filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that hoses and fittings are air tight\u003c\/li\u003e\n\u003cli\u003eCheck, clean and replace\u003c\/li\u003e\n\u003cli\u003eCheck and replace if necessary\u003c\/li\u003e\n\u003cli\u003eReduce Temperature\u003c\/li\u003e\n\u003cli\u003eCheck and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eWater in oil.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh humidity in air\u003c\/li\u003e\n\u003cli\u003ePiston seal or oil seal worn out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and change oil twice as often\u003c\/li\u003e\n\u003cli\u003eCheck and replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eWater dripping from under the pump.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePiston seals damaged or worn out\u003c\/li\u003e\n\u003cli\u003eThe O-ring of piston guide or retainer worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and Replace\u003c\/li\u003e\n\u003cli\u003eCheck and Replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eOil leaking.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOil seal worn out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and Replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eThe motor does not start when switched on.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe plug not well connected or lack of power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck plug, cable and switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eWhen switching the unit on, the motor turns but does not run.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe mains voltage is insufficient, lower than the minimum requirement\u003c\/li\u003e\n\u003cli\u003eThe pump is stuck or frozen\u003c\/li\u003e\n\u003cli\u003eIncorrect extension cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the main power supply is adequate\u003c\/li\u003e\n\u003cli\u003eFollow the correct precautions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFault:\u003c\/b\u003e\u003cspan\u003eThe motor stops running.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTripped internal overload due to overheating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSolution:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the main voltage corresponds to the specifications\u003c\/li\u003e\n\u003cli\u003eWait a few minutes before turning on the unit again\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scrubio Cleaning","offers":[{"title":"Default Title","offer_id":52725018558737,"sku":null,"price":13999.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/2358\/7857\/files\/4_f2ff9b13-75c1-4101-9cbe-a57c26dba2ac.png?v=1763084259"},{"product_id":"pressure-washer-12-6l-min-2700psi-6-5-hp-petrol","title":"Pressure Washer, 12.6L\/min, 2700Psi, 6.5 HP Petrol","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA 6.5 Horsepower Petrol high-pressure washer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e6.5HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFuel:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ePetrol\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRevolutions:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e3400RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax. Pressure:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e186 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e12.6 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUsage:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine must be switched off when not in use. If the gun is released and the pump enters its unloading state, the machine can only facilitate this for 30 seconds before the water starts overheating and ultimately damaging the pump. If any damage comes to the pump from deformation or destruction of internal components, overheating is the likely cause.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine comes with a \u003c\/span\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11131R\"\u003eRed Gun\u003c\/a\u003e\u003cspan\u003e, a 7m 280bar high-pressure hose, a short hose, a low-pressure chemical injector, and the following nozzles:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139R\"\u003eRed nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139Y\"\u003eYellow nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139W\"\u003eWhite nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139K\"\u003eBlack nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139G\"\u003eGreen nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIMPORTANT SAFETY INSTRUCTIONS\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eRead Operation manual. Do not operate equipment until you have read operation manual for safety, assembly, operation, and maintenance instructions.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF FIRE OR EXPLOSION.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eSpoiled gasoline and it's vapors can become ignited from cigarette sparks, electrical arcing, exhaust gases, and hot engine components suck as the silencer.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShut off the engine and allow it to cool before adding fuel tank.\u003c\/li\u003e\n\u003cli\u003eUse care in filling tank to avoid spilling fuel.\u003c\/li\u003e\n\u003cli\u003eMove washer pump away from fueling area before starting the engine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eHeat will expand fuel in the tank which could result in a fire.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep maximum fuel level 1\/2 below top of tank to allow for expansion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eOperating the washer pump in an explosive environment could result in a fire.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperate and fuel equipment in well ventilated zones free from obstructions. Equipped zones with fire extinguisher suitable for gasoline fires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eMaterials placed against or near the washer pump can interfere with its proper ventilation causing overheating and possible ignition of the materials.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNever operate washer pump in an area containing dry brush or weeds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eSilencer exhaust heat can damage painted surfaces, melt any material sensitive to heat and damage plants.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways keep washer pump a minimum of five feet away from surfaces that could be damaged from muffler exhaust heat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eImproperly stored fuel could lead to accidental ignition. Improperly secured fuel could get into the hands of children or other unqualified people.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStore fuel in an approved container in a secure location away from work area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eUse of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO NOT stray flammable liquids.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK TO BREATHING\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eBreathing exhaust fumes will cause serious injury even death.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperate washer pump in well ventilated area.\u003c\/li\u003e\n\u003cli\u003eAvoid enclosed areas such as garages, basements, etc.\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eSome cleaning fluids contain substances that could cause injury to skin, eyes, or lungs.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse only cleaning fluids specifically recommended for washer pump. Follow manufactures recommendations. DO NOT use chlorine bleach or any other corrosive compounds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING OR STORING\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eFuel and oil can leak or spill and could result in fire or more breathing hazard, serious injury or death. Fuel or oil leaks will damage carpet, paint, or other surfaces in vehicles or trailers.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf water pump is equipped with a fuel shut-off valve, turn the valve to the off position before transportation to avoid fuel leaks. If washer pump is not equipped with a fuel shut-off valve, drain the fuel from the tank before transportation, only transport fuel in an approved container. Always place washer pump on a protective mat when transporting to protect against damage to vehicle from leaks. Remove washer pump from the vehicle immediately upon arrival at your destination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF HOT SURFACES\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eContact with hot surfaces, such as engines exhaust components, could result in serious burn.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDuring operation, touch only the control surface of the washer pump. Keep children away from the washer pump at all times. They are too young to recognize the hazards of this product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF FLUID INJECTION.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eYour washer pump operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injuries. Leaks caused by loose fittings or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT. See a physician immediately.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNever place hands in front of nozzle.\u003c\/li\u003e\n\u003cli\u003eDirect spray away from self and others.\u003c\/li\u003e\n\u003cli\u003eMake sure hose and fittings are tightened and in good condition. Never hold onto the hose or fittings during operation.\u003c\/li\u003e\n\u003cli\u003eDo not allow hose to contact muffler.\u003c\/li\u003e\n\u003cli\u003eNever attach or remove lance or hose fittings while system is pressurized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eInjuries can result if system pressure is not reduced before attempting maintenance or disassembly.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo relieve system pressure, shut off engine, turn off water supply, and pull gun trigger until water stops flowing.\u003c\/li\u003e\n\u003cli\u003eUse only hose and accessories rated for pressure higher than your washer pump's PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF INJURY FROM SPRAY.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eHigh velocity fluid spray can cause objects to break, propelling particles at high speed.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLight or unsecured objects can become hazardous projectiles.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways wear approved safety glasses.\u003c\/li\u003e\n\u003cli\u003eWear protective clothing to protect against accidental spraying.\u003c\/li\u003e\n\u003cli\u003eNever point lance at people or animals.\u003c\/li\u003e\n\u003cli\u003eAlways secure trigger lock when lance is not in service to prevent accidental operation.\u003c\/li\u003e\n\u003cli\u003eNever permanently secure trigger in open position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF CHEMICAL BURN.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eUse of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO NOT use acids, gasoline, kerosene, or any other flammable materials in this product. Use only household detergents, cleaners and degreaser recommended recommended for use in washer pump\u003c\/li\u003e\n\u003cli\u003eWear protective clothing to protect eyes and skin from contact with sprayed materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF UNSAFE OPERATION.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eUnsafe operations of your washer pump could lead to serious injury or death to you and others.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO NOT use chlorine bleach or any other corrosive compound.\u003c\/li\u003e\n\u003cli\u003eBecome familiar with the operation and controls of the washer pump.\u003c\/li\u003e\n\u003cli\u003eKeep operating area clear of all persons, pets and obstacles.\u003c\/li\u003e\n\u003cli\u003eDO NOT operate the product when fatigued or under the influence of alcohol or drugs. Stay alert at all times.\u003c\/li\u003e\n\u003cli\u003eNever defeat the safety features of the machine.\u003c\/li\u003e\n\u003cli\u003eDo not operate machine with missing, broke or unauthorized parts.\u003c\/li\u003e\n\u003cli\u003eNever leave lance unattended while unit is running.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eIf proper starting procedure is not followed, engine can kickback, causing serious hand and arm injury.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf engine does not start after two pulls, squeeze trigger of gun to relieve pump pressure, pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kickback and prevent hand or arm injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eThe gun\/lance is a powerful cleaning tool that could look like a toy to a child.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep children away from the washer pump at all times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eReactive force of spray will cause gun\/wand to move, and could cause the operator to slip or fall, or misdirect the pray. Improper control of gun\/lance can result in injury to self or others.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not overreach or stand on an unstable support. Grip gun\/lance firmly with both hands. Expect the gun to kick when triggered.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF ELECTRICAL SHOCK.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eSpray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWASHER PUMP TERMINOLOGY\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003e\u003cu\u003ePSI:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e POUNDS PER SQUARE INCH, the unit measure for water pressure, also used for air pressure, hydraulic pressure, etc.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eGPM:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e GALLONS PER MINUTE, the unit measure for the flow rate of water.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eBypass Mode:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e In bypass mode, the pump is recirculating water because the trigger of the spray gun is not pulled. If unit is left in bypass mode for more than two minutes.The water pressure will rise to a dangerous level and could damage internal components of the pump. Any damage to pump due to these causes will not be covered under warranty.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDo not allow unit to operate in bypass mode for more than two minutes at any time. Overheating of pump can cause damage to pump.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eThermal Relief Valve:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e In an effort to prevent extreme damage, pumps are equipped with a thermal relief valve. This valve will open the temperature inside the pump rises too high. This valve will then release a gush of water in an effort to lower the temperature inside the pump. Immediately after this occurs, the valve will close.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eChemical Injection System:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e Mixes cleaners or cleaning solvents with the pressurized water to improve cleaning effectiveness.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eWater Supply:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e All pressure washers must have a source of water. The minimum requirement for a water supply is 20PSI and 5 gallon per minute.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWASHER PUMP OPERATING FEATURES.\u003c\/h3\u003e\n\u003ch4\u003ePRESSURE REGULATOR\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eThe pressure setting is preset at the factory to achieve optimum pressure and cleaning.If you need to lower the pressure,it can be accomplished by these methods.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1. \u003c\/span\u003e\u003cb\u003eBack away from the surface to be cleaned.\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eThe further away you are,the less the pressure will be on the surface to be cleaned.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e Do not attempt to increase pump pressure. A higher pressure setting than the factory set pressure may damage pump.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2. \u003c\/span\u003e\u003cb\u003eReduce the speed the gasoline engine (RPM).\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eSlow the engine down and the water pressure will go down with it.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3. \u003c\/span\u003e\u003cb\u003eChange to a nozzle ,\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eThis nozzle delivers a less powerful stream of water and a wider spray pattern.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4.\u003c\/span\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eAdjust the pressure regulator on the pump .\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eTurn the pressure regulator knob counter-clockwise to lower pressure. Once you have finished using your pressure washer, return the pressure regulator to it's original position by turning it clockwise.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e Do not try to turn pressure regulator knob past the build-in stop or pump may be damaged.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to apply chemicals and cleaning solvents\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e Applying chemicals or cleaning solvents is a low pressure operation.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUse only soaps and chemicals designed for washer pumps, \u003c\/span\u003e\u003cb\u003eDO NOT use bleach\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eHOW TO APPLY CHEMICALS AND CLEANING SOLVENTS:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003ePress chemical hose onto barbed fitting located near the high pressure hose connection of the pump.\u003c\/li\u003e\n\u003cli\u003ePlace other end of chemical hose with filter on it into container holding the chemical solution.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe chemical\/water ratio is 1:7, for every 7 gallons of water pumped, 1 gallon of chemical\/ cleaning solution will be used.\u003c\/li\u003e\n\u003cli\u003eChange to the low pressure nozzle.\u003c\/li\u003e\n\u003cli\u003eAfter use of chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly. If chemicals remain in the pump it could be harmful to the pump. Pumps that are damaged due to chemicals will not be covered under warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eChemicals and soaps will not siphon when lance is in the high pressure setting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWARNINGS\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e When using the high pressure setting, DO NOT allow the high pressure spray to come in contact with unprotected skin, eyes, or with any animals. Serious injury can occur.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYour washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injuries. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. \u003c\/span\u003e\u003cb\u003eDO NOT TREAT FLUID INJECTION AS A SIMPLE CUT. See a physician immediately.\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e NEVER fill fuel tank when engine is running or hot. DO NOT smoke when filling the fuel tank.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER fill the fuel tank completely. Fill the tank to 1\/2\" below the bottom of the filter neck to provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, and odorless and deadly gas.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER let hoses come in contact with very hot engine muffler during or immediately after use of your washer pump. Damage to hoses from the contact with hot engine surfaces will NOT be covered by warranty.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER pull water supply from hose to move washer pump. This could damage hose and pump inlet.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER use hot water. COLD WATER ONLY.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER turn water supply while washer pump engine is running or damage to pump will result.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDO NOT STOP spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes internal components of the pump can be damaged.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eSTARTING\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to starting, refer to your engine manual for proper starting procedures for your engine type.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eIn a well ventilated outdoor area add fresh, high quality, unleaded gasoline with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled fuel before starting the engine.\u003c\/li\u003e\n\u003cli\u003eCheck engine oil level.\u003c\/li\u003e\n\u003cli\u003eConnect water source to pump inlet. Water source must provide a minimum of 5 gallons at 20PSI.\u003c\/li\u003e\n\u003cli\u003eConnect high pressure water hose to pump outlet.\u003c\/li\u003e\n\u003cli\u003eTurn on water source. Failure to do so can cause damage to the pump.\u003c\/li\u003e\n\u003cli\u003eStart engine. If the engine does not start after two pulls, pull the trigger on the gun to relieve the pressure.\u003c\/li\u003e\n\u003cli\u003eDepress trigger on gun to start water flow. Stand on a stable surface and grip gun with both hands. Expect the gun to kick when triggered.\u003c\/li\u003e\n\u003cli\u003eRelease trigger to stop water flow.\u003c\/li\u003e\n\u003cli\u003eAdjust spray for the task being performed be changing nozzle.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSHUTTING DOWN\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eAfter each use, if you have a[plied chemicals, place chemical hose into the container op clean water and draw clean water through chemical injection system to rinse system thoroughly. Failure to do so could cause damage to the pump.\u003c\/li\u003e\n\u003cli\u003eTurn engine off. NEVER turn the water off with the engine running.\u003c\/li\u003e\n\u003cli\u003eTurn off the water source.\u003c\/li\u003e\n\u003cli\u003ePull the trigger on the spray gun to relieve any water pressure in hose or gun.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eMAINTENANCE\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e When performing maintenance, you may be exposed to hot surfaces, water pressure, or moving parts that can cause serious injury or death.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBefore performing any maintenance or repair, disconnect spark plug wire, let engine cool and release all water pressure. The engine contains flammable fuel.DO NOT SMOKE or work near open flames while performing maintenance.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo ensure efficient operation and longer life of your washer pump, a routine maintenance schedule should be prepared and followed. If the washer pump is used in unusual conditions, such as high-temperature or dusty conditions, more frequent maintenance checks will be required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eTO CHECK OIL\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eRemove oil inlet plug from pump and wipe clean.\u003c\/li\u003e\n\u003cli\u003eInsert oil inlet plug fully into pump, then remove it.\u003c\/li\u003e\n\u003cli\u003eoil level is correct when oil covers the lower 1\/2 inch of end of oil inlet plug.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eHOW TO CHANGE PUMP OIL\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eLoosen oil inlet plug.\u003c\/li\u003e\n\u003cli\u003ePlace a container under the oil drain plug.\u003c\/li\u003e\n\u003cli\u003eRemove oil drain plug.\u003c\/li\u003e\n\u003cli\u003eAfter oil is drained replace oil drain plug tighten securely.\u003c\/li\u003e\n\u003cli\u003eRemove oil inlet plug and fill with recommended oil.\u003c\/li\u003e\n\u003cli\u003eReplace oil inlet plug and tighten securely.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eHOW TO CLEAN INLET WATER FILTER\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eThis screen filter should be checked periodically and cleaned if necessary.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove filter by grasping end and removing it from water inlet of pump as shown.\u003c\/li\u003e\n\u003cli\u003eClean filter by flushing it with water on both sides.\u003c\/li\u003e\n\u003cli\u003eRe-inserting filter into water inlet pump.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003eNote\u003c\/b\u003e\u003cspan\u003e Cone side faces out.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote\u003c\/b\u003e\u003cspan\u003e Do not operate pressure washer without filter properly installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eSTORAGE\u003c\/h3\u003e\n\u003ch4\u003ePUMP\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eDrain all water from high pressure water hose, coil it, and store it in cradle of the washer pump handle.\u003c\/li\u003e\n\u003cli\u003eDrain all water from gun and lance by holding gun in vertical position with nozzle end pointing down and squeezing trigger. Store in gun\/hose holder.\u003c\/li\u003e\n\u003cli\u003eStore chemical hose, high pressure water hose, so they are protected from damage, such as being run over.\u003cbr\u003e\u003cbr\u003eIt is recommended that you follow these steps to protect the internal seals of the washer pump when storing the unit for more than 30 days and\/or when freezing temperatures are expected.\u003c\/li\u003e\n\u003cli\u003eObtain a funnel, six ounces of RV antifreeze, and approximately 36 inches of garden hose with a male connector attached to one end.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eUse only RV antifreeze. Any other antifreeze is corrosive and can damage pump.\u003c\/li\u003e\n\u003cli\u003eDisconnect spark plug wire.\u003c\/li\u003e\n\u003cli\u003eConnect the hose to water inlet of pump.\u003c\/li\u003e\n\u003cli\u003eAdd RV antifreeze to hose.\u003c\/li\u003e\n\u003cli\u003ePull engine starter rope slowly several time, until antifreeze comes out of high pressure water hose connection of pump.\u003c\/li\u003e\n\u003cli\u003eRemove short hose from water inlet of pump.\u003c\/li\u003e\n\u003cli\u003eReconnect spark plug wire.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTROUBLESHOOTING GUIDE\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eEngine will not start\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo fuel.\u003c\/li\u003e\n\u003cli\u003eNo oil.\u003c\/li\u003e\n\u003cli\u003ePressure builds up after two pulls on the recoil starter or after initial use.\u003c\/li\u003e\n\u003cli\u003eChoke lever in the \"no choke\" position.\u003c\/li\u003e\n\u003cli\u003eSpark plug wire not attached.\u003c\/li\u003e\n\u003cli\u003eEngine ON\/OFF position.\u003c\/li\u003e\n\u003cli\u003eChoke lever in the \"choke\" position on a \"hot\" engine or an engine that has been exposed to thermal heat for a long period of time.\u003c\/li\u003e\n\u003cli\u003eFuel valve id closed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd Fuel.\u003c\/li\u003e\n\u003cli\u003eAdd required amount of oil.\u003c\/li\u003e\n\u003cli\u003eSqueeze gun trigger to relieve pressure.\u003c\/li\u003e\n\u003cli\u003eMove choke to the \"choke\" position.\u003c\/li\u003e\n\u003cli\u003eAttach spark plug wire.\u003c\/li\u003e\n\u003cli\u003ePlace engine ON\/OFF switch in ON position.\u003c\/li\u003e\n\u003cli\u003eMove choke to the \"no choke\" position.\u003c\/li\u003e\n\u003cli\u003eMove fuel valve lever to the \"open\" position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eNo or Low Pressure (initial use)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLower water supply.\u003c\/li\u003e\n\u003cli\u003eLeak at high pressure hose fitting.\u003c\/li\u003e\n\u003cli\u003eWater filter screen clogged.\u003c\/li\u003e\n\u003cli\u003eAir in hose.\u003c\/li\u003e\n\u003cli\u003eChoke lever in the \"choke\" position.\u003c\/li\u003e\n\u003cli\u003eThrottle control lever is hot in the \"fast\" position.\u003c\/li\u003e\n\u003cli\u003eHigh pressure water hose is too long.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWater supply must be at least 5.0 gal\/min.\u003c\/li\u003e\n\u003cli\u003eTighten the pressure hose. Apply sealant tape if necessary.\u003c\/li\u003e\n\u003cli\u003eRemove and clean filter.\u003c\/li\u003e\n\u003cli\u003eTurn off the engine, then the water source. Disconnect the water from the pump inlet and turn the water source on to remove all air from the hose. When there is a steady stream of water present, turn water source off.\u003c\/li\u003e\n\u003cli\u003eMove choke to the \"no choke\" position.\u003c\/li\u003e\n\u003cli\u003eMove throttle control lever to the \"fast\" position.\u003c\/li\u003e\n\u003cli\u003eUse high pressure water hose under 50 feet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eWill not draw chemicals.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChemical filter clogged.\u003c\/li\u003e\n\u003cli\u003eChemical screen not in chemical.\u003c\/li\u003e\n\u003cli\u003eChemical too thick.\u003c\/li\u003e\n\u003cli\u003ePressure hose too long.\u003c\/li\u003e\n\u003cli\u003eChemical build up in chemical injector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean filter.\u003c\/li\u003e\n\u003cli\u003eEnsure end of chemical hose is fully submerged into the chemical.\u003c\/li\u003e\n\u003cli\u003eDilute chemical. Chemicals should be the same consistency as water.\u003c\/li\u003e\n\u003cli\u003eLengthen the water supply hose instead of high pressure water hose.\u003c\/li\u003e\n\u003cli\u003eHave parts cleaned or replaced.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eNo or low pressure (after period of normal use)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorn seals of packing.\u003c\/li\u003e\n\u003cli\u003eWorn or obstructed valves.\u003c\/li\u003e\n\u003cli\u003eWorn unloader piston.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and Replace.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eWater leaking at gun\/lance connection.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorn or broken o-ring.\u003c\/li\u003e\n\u003cli\u003eLoose hose connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace o-ring\u003c\/li\u003e\n\u003cli\u003eThighten hose connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eOil leaking at pump.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOil seals worn.\u003c\/li\u003e\n\u003cli\u003eLoose oil drain plug.\u003c\/li\u003e\n\u003cli\u003eWorn oil drain plug o-ring.\u003c\/li\u003e\n\u003cli\u003eWorn filter plug o-ring.\u003c\/li\u003e\n\u003cli\u003ePump Overfilled.\u003c\/li\u003e\n\u003cli\u003eIncorrect oil used.\u003c\/li\u003e\n\u003cli\u003eVent plug is clogged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace any prken parts.\u003c\/li\u003e\n\u003cli\u003eThighten loose connections.\u003c\/li\u003e\n\u003cli\u003eCheck for correct amount of oil.\u003c\/li\u003e\n\u003cli\u003eDrain and fill with correct amount and tpe of oil.\u003c\/li\u003e\n\u003cli\u003eClean vent plug, below air through it to remove any blockage. If problem persists. replace plug.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scrubio Cleaning","offers":[{"title":"Default Title","offer_id":52725019640081,"sku":null,"price":9999.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/2358\/7857\/files\/5_49db2c9d-886f-440c-8b9b-09e7c5cb6056.png?v=1763084476"},{"product_id":"pressure-washer-20-7-l-min-3600-psi-13-horsepower-petrol","title":"Pressure Washer, 20\/7 L\/min, 3600 Psi 13 HP Petrol","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA 13 Horsepower Petrol high-pressure washer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e13HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFuel:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ePetrol\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRevolutions:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e3400RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax. Pressure:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e240 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e20.7 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUsage:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine must be switched off when not in use. If the gun is released and the pump enters its unloading state, the machine can only facilitate this for 30 seconds before the water starts overheating and ultimately damaging the pump. If any damage comes to the pump from deformation or destruction of internal components, overheating is the likely cause.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine comes with a \u003c\/span\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11131R\"\u003eRed Gun\u003c\/a\u003e\u003cspan\u003e, a 7m 280bar high-pressure hose, a short hose, a low-pressure chemical injector, and the following nozzles:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139R\"\u003eRed nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139Y\"\u003eYellow nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139W\"\u003eWhite nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139K\"\u003eBlack nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139G\"\u003eGreen nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIMPORTANT SAFETY INSTRUCTIONS\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eRead Operation manual. Do not operate equipment until you have read operation manual for safety, assembly, operation, and maintenance instructions.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF FIRE OR EXPLOSION.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eSpoiled gasoline and it's vapors can become ignited from cigarette sparks, electrical arcing, exhaust gases, and hot engine components suck as the silencer.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShut off the engine and allow it to cool before adding fuel tank.\u003c\/li\u003e\n\u003cli\u003eUse care in filling tank to avoid spilling fuel.\u003c\/li\u003e\n\u003cli\u003eMove washer pump away from fueling area before starting the engine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eHeat will expand fuel in the tank which could result in a fire.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep maximum fuel level 1\/2 below top of tank to allow for expansion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eOperating the washer pump in an explosive environment could result in a fire.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperate and fuel equipment in well ventilated zones free from obstructions. Equipped zones with fire extinguisher suitable for gasoline fires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eMaterials placed against or near the washer pump can interfere with its proper ventilation causing overheating and possible ignition of the materials.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNever operate washer pump in an area containing dry brush or weeds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eSilencer exhaust heat can damage painted surfaces, melt any material sensitive to heat and damage plants.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways keep washer pump a minimum of five feet away from surfaces that could be damaged from muffler exhaust heat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eImproperly stored fuel could lead to accidental ignition. Improperly secured fuel could get into the hands of children or other unqualified people.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStore fuel in an approved container in a secure location away from work area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eUse of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO NOT stray flammable liquids.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK TO BREATHING\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eBreathing exhaust fumes will cause serious injury even death.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperate washer pump in well ventilated area.\u003c\/li\u003e\n\u003cli\u003eAvoid enclosed areas such as garages, basements, etc.\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eSome cleaning fluids contain substances that could cause injury to skin, eyes, or lungs.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse only cleaning fluids specifically recommended for washer pump. Follow manufactures recommendations. DO NOT use chlorine bleach or any other corrosive compounds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING OR STORING\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eFuel and oil can leak or spill and could result in fire or more breathing hazard, serious injury or death. Fuel or oil leaks will damage carpet, paint, or other surfaces in vehicles or trailers.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf water pump is equipped with a fuel shut-off valve, turn the valve to the off position before transportation to avoid fuel leaks. If washer pump is not equipped with a fuel shut-off valve, drain the fuel from the tank before transportation, only transport fuel in an approved container. Always place washer pump on a protective mat when transporting to protect against damage to vehicle from leaks. Remove washer pump from the vehicle immediately upon arrival at your destination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF HOT SURFACES\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eContact with hot surfaces, such as engines exhaust components, could result in serious burn.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDuring operation, touch only the control surface of the washer pump. Keep children away from the washer pump at all times. They are too young to recognize the hazards of this product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF FLUID INJECTION.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eYour washer pump operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injuries. Leaks caused by loose fittings or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT. See a physician immediately.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNever place hands in front of nozzle.\u003c\/li\u003e\n\u003cli\u003eDirect spray away from self and others.\u003c\/li\u003e\n\u003cli\u003eMake sure hose and fittings are tightened and in good condition. Never hold onto the hose or fittings during operation.\u003c\/li\u003e\n\u003cli\u003eDo not allow hose to contact muffler.\u003c\/li\u003e\n\u003cli\u003eNever attach or remove lance or hose fittings while system is pressurized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eInjuries can result if system pressure is not reduced before attempting maintenance or disassembly.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo relieve system pressure, shut off engine, turn off water supply, and pull gun trigger until water stops flowing.\u003c\/li\u003e\n\u003cli\u003eUse only hose and accessories rated for pressure higher than your washer pump's PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF INJURY FROM SPRAY.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eHigh velocity fluid spray can cause objects to break, propelling particles at high speed.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLight or unsecured objects can become hazardous projectiles.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways wear approved safety glasses.\u003c\/li\u003e\n\u003cli\u003eWear protective clothing to protect against accidental spraying.\u003c\/li\u003e\n\u003cli\u003eNever point lance at people or animals.\u003c\/li\u003e\n\u003cli\u003eAlways secure trigger lock when lance is not in service to prevent accidental operation.\u003c\/li\u003e\n\u003cli\u003eNever permanently secure trigger in open position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF CHEMICAL BURN.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eUse of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO NOT use acids, gasoline, kerosene, or any other flammable materials in this product. Use only household detergents, cleaners and degreaser recommended recommended for use in washer pump\u003c\/li\u003e\n\u003cli\u003eWear protective clothing to protect eyes and skin from contact with sprayed materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF UNSAFE OPERATION.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eUnsafe operations of your washer pump could lead to serious injury or death to you and others.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO NOT use chlorine bleach or any other corrosive compound.\u003c\/li\u003e\n\u003cli\u003eBecome familiar with the operation and controls of the washer pump.\u003c\/li\u003e\n\u003cli\u003eKeep operating area clear of all persons, pets and obstacles.\u003c\/li\u003e\n\u003cli\u003eDO NOT operate the product when fatigued or under the influence of alcohol or drugs. Stay alert at all times.\u003c\/li\u003e\n\u003cli\u003eNever defeat the safety features of the machine.\u003c\/li\u003e\n\u003cli\u003eDo not operate machine with missing, broke or unauthorized parts.\u003c\/li\u003e\n\u003cli\u003eNever leave lance unattended while unit is running.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eIf proper starting procedure is not followed, engine can kickback, causing serious hand and arm injury.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf engine does not start after two pulls, squeeze trigger of gun to relieve pump pressure, pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kickback and prevent hand or arm injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eThe gun\/lance is a powerful cleaning tool that could look like a toy to a child.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep children away from the washer pump at all times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eReactive force of spray will cause gun\/wand to move, and could cause the operator to slip or fall, or misdirect the pray. Improper control of gun\/lance can result in injury to self or others.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not overreach or stand on an unstable support. Grip gun\/lance firmly with both hands. Expect the gun to kick when triggered.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF ELECTRICAL SHOCK.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eSpray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWASHER PUMP TERMINOLOGY\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003e\u003cu\u003ePSI:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e POUNDS PER SQUARE INCH, the unit measure for water pressure, also used for air pressure, hydraulic pressure, etc.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eGPM:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e GALLONS PER MINUTE, the unit measure for the flow rate of water.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eBypass Mode:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e In bypass mode, the pump is recirculating water because the trigger of the spray gun is not pulled. If unit is left in bypass mode for more than two minutes.The water pressure will rise to a dangerous level and could damage internal components of the pump. Any damage to pump due to these causes will not be covered under warranty.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDo not allow unit to operate in bypass mode for more than two minutes at any time. Overheating of pump can cause damage to pump.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eThermal Relief Valve:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e In an effort to prevent extreme damage, pumps are equipped with a thermal relief valve. This valve will open the temperature inside the pump rises too high. This valve will then release a gush of water in an effort to lower the temperature inside the pump. Immediately after this occurs, the valve will close.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eChemical Injection System:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e Mixes cleaners or cleaning solvents with the pressurized water to improve cleaning effectiveness.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eWater Supply:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e All pressure washers must have a source of water. The minimum requirement for a water supply is 20PSI and 5 gallon per minute.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWASHER PUMP OPERATING FEATURES.\u003c\/h3\u003e\n\u003ch4\u003ePRESSURE REGULATOR\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eThe pressure setting is preset at the factory to achieve optimum pressure and cleaning.If you need to lower the pressure,it can be accomplished by these methods.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1. \u003c\/span\u003e\u003cb\u003eBack away from the surface to be cleaned.\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eThe further away you are,the less the pressure will be on the surface to be cleaned.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e Do not attempt to increase pump pressure. A higher pressure setting than the factory set pressure may damage pump.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2. \u003c\/span\u003e\u003cb\u003eReduce the speed the gasoline engine (RPM).\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eSlow the engine down and the water pressure will go down with it.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3. \u003c\/span\u003e\u003cb\u003eChange to a nozzle ,\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eThis nozzle delivers a less powerful stream of water and a wider spray pattern.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4.\u003c\/span\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eAdjust the pressure regulator on the pump .\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eTurn the pressure regulator knob counter-clockwise to lower pressure. Once you have finished using your pressure washer, return the pressure regulator to it's original position by turning it clockwise.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e Do not try to turn pressure regulator knob past the build-in stop or pump may be damaged.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to apply chemicals and cleaning solvents\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e Applying chemicals or cleaning solvents is a low pressure operation.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUse only soaps and chemicals designed for washer pumps, \u003c\/span\u003e\u003cb\u003eDO NOT use bleach\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eHOW TO APPLY CHEMICALS AND CLEANING SOLVENTS:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003ePress chemical hose onto barbed fitting located near the high pressure hose connection of the pump.\u003c\/li\u003e\n\u003cli\u003ePlace other end of chemical hose with filter on it into container holding the chemical solution.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe chemical\/water ratio is 1:7, for every 7 gallons of water pumped, 1 gallon of chemical\/ cleaning solution will be used.\u003c\/li\u003e\n\u003cli\u003eChange to the low pressure nozzle.\u003c\/li\u003e\n\u003cli\u003eAfter use of chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly. If chemicals remain in the pump it could be harmful to the pump. Pumps that are damaged due to chemicals will not be covered under warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eChemicals and soaps will not siphon when lance is in the high pressure setting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWARNINGS\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e When using the high pressure setting, DO NOT allow the high pressure spray to come in contact with unprotected skin, eyes, or with any animals. Serious injury can occur.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYour washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injuries. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. \u003c\/span\u003e\u003cb\u003eDO NOT TREAT FLUID INJECTION AS A SIMPLE CUT. See a physician immediately.\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e NEVER fill fuel tank when engine is running or hot. DO NOT smoke when filling the fuel tank.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER fill the fuel tank completely. Fill the tank to 1\/2\" below the bottom of the filter neck to provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, and odorless and deadly gas.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER let hoses come in contact with very hot engine muffler during or immediately after use of your washer pump. Damage to hoses from the contact with hot engine surfaces will NOT be covered by warranty.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER pull water supply from hose to move washer pump. This could damage hose and pump inlet.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER use hot water. COLD WATER ONLY.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER turn water supply while washer pump engine is running or damage to pump will result.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDO NOT STOP spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes internal components of the pump can be damaged.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eSTARTING\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to starting, refer to your engine manual for proper starting procedures for your engine type.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eIn a well ventilated outdoor area add fresh, high quality, unleaded gasoline with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled fuel before starting the engine.\u003c\/li\u003e\n\u003cli\u003eCheck engine oil level.\u003c\/li\u003e\n\u003cli\u003eConnect water source to pump inlet. Water source must provide a minimum of 5 gallons at 20PSI.\u003c\/li\u003e\n\u003cli\u003eConnect high pressure water hose to pump outlet.\u003c\/li\u003e\n\u003cli\u003eTurn on water source. Failure to do so can cause damage to the pump.\u003c\/li\u003e\n\u003cli\u003eStart engine. If the engine does not start after two pulls, pull the trigger on the gun to relieve the pressure.\u003c\/li\u003e\n\u003cli\u003eDepress trigger on gun to start water flow. Stand on a stable surface and grip gun with both hands. Expect the gun to kick when triggered.\u003c\/li\u003e\n\u003cli\u003eRelease trigger to stop water flow.\u003c\/li\u003e\n\u003cli\u003eAdjust spray for the task being performed be changing nozzle.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSHUTTING DOWN\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eAfter each use, if you have a[plied chemicals, place chemical hose into the container op clean water and draw clean water through chemical injection system to rinse system thoroughly. Failure to do so could cause damage to the pump.\u003c\/li\u003e\n\u003cli\u003eTurn engine off. NEVER turn the water off with the engine running.\u003c\/li\u003e\n\u003cli\u003eTurn off the water source.\u003c\/li\u003e\n\u003cli\u003ePull the trigger on the spray gun to relieve any water pressure in hose or gun.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eMAINTENANCE\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e When performing maintenance, you may be exposed to hot surfaces, water pressure, or moving parts that can cause serious injury or death.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBefore performing any maintenance or repair, disconnect spark plug wire, let engine cool and release all water pressure. The engine contains flammable fuel.DO NOT SMOKE or work near open flames while performing maintenance.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo ensure efficient operation and longer life of your washer pump, a routine maintenance schedule should be prepared and followed. If the washer pump is used in unusual conditions, such as high-temperature or dusty conditions, more frequent maintenance checks will be required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eTO CHECK OIL\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eRemove oil inlet plug from pump and wipe clean.\u003c\/li\u003e\n\u003cli\u003eInsert oil inlet plug fully into pump, then remove it.\u003c\/li\u003e\n\u003cli\u003eoil level is correct when oil covers the lower 1\/2 inch of end of oil inlet plug.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eHOW TO CHANGE PUMP OIL\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eLoosen oil inlet plug.\u003c\/li\u003e\n\u003cli\u003ePlace a container under the oil drain plug.\u003c\/li\u003e\n\u003cli\u003eRemove oil drain plug.\u003c\/li\u003e\n\u003cli\u003eAfter oil is drained replace oil drain plug tighten securely.\u003c\/li\u003e\n\u003cli\u003eRemove oil inlet plug and fill with recommended oil.\u003c\/li\u003e\n\u003cli\u003eReplace oil inlet plug and tighten securely.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eHOW TO CLEAN INLET WATER FILTER\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eThis screen filter should be checked periodically and cleaned if necessary.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove filter by grasping end and removing it from water inlet of pump as shown.\u003c\/li\u003e\n\u003cli\u003eClean filter by flushing it with water on both sides.\u003c\/li\u003e\n\u003cli\u003eRe-inserting filter into water inlet pump.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003eNote\u003c\/b\u003e\u003cspan\u003e Cone side faces out.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote\u003c\/b\u003e\u003cspan\u003e Do not operate pressure washer without filter properly installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eSTORAGE\u003c\/h3\u003e\n\u003ch4\u003ePUMP\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eDrain all water from high pressure water hose, coil it, and store it in cradle of the washer pump handle.\u003c\/li\u003e\n\u003cli\u003eDrain all water from gun and lance by holding gun in vertical position with nozzle end pointing down and squeezing trigger. Store in gun\/hose holder.\u003c\/li\u003e\n\u003cli\u003eStore chemical hose, high pressure water hose, so they are protected from damage, such as being run over.\u003cbr\u003e\u003cbr\u003eIt is recommended that you follow these steps to protect the internal seals of the washer pump when storing the unit for more than 30 days and\/or when freezing temperatures are expected.\u003c\/li\u003e\n\u003cli\u003eObtain a funnel, six ounces of RV antifreeze, and approximately 36 inches of garden hose with a male connector attached to one end.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eUse only RV antifreeze. Any other antifreeze is corrosive and can damage pump.\u003c\/li\u003e\n\u003cli\u003eDisconnect spark plug wire.\u003c\/li\u003e\n\u003cli\u003eConnect the hose to water inlet of pump.\u003c\/li\u003e\n\u003cli\u003eAdd RV antifreeze to hose.\u003c\/li\u003e\n\u003cli\u003ePull engine starter rope slowly several time, until antifreeze comes out of high pressure water hose connection of pump.\u003c\/li\u003e\n\u003cli\u003eRemove short hose from water inlet of pump.\u003c\/li\u003e\n\u003cli\u003eReconnect spark plug wire.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTROUBLESHOOTING GUIDE\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eEngine will not start\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo fuel.\u003c\/li\u003e\n\u003cli\u003eNo oil.\u003c\/li\u003e\n\u003cli\u003ePressure builds up after two pulls on the recoil starter or after initial use.\u003c\/li\u003e\n\u003cli\u003eChoke lever in the \"no choke\" position.\u003c\/li\u003e\n\u003cli\u003eSpark plug wire not attached.\u003c\/li\u003e\n\u003cli\u003eEngine ON\/OFF position.\u003c\/li\u003e\n\u003cli\u003eChoke lever in the \"choke\" position on a \"hot\" engine or an engine that has been exposed to thermal heat for a long period of time.\u003c\/li\u003e\n\u003cli\u003eFuel valve id closed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd Fuel.\u003c\/li\u003e\n\u003cli\u003eAdd required amount of oil.\u003c\/li\u003e\n\u003cli\u003eSqueeze gun trigger to relieve pressure.\u003c\/li\u003e\n\u003cli\u003eMove choke to the \"choke\" position.\u003c\/li\u003e\n\u003cli\u003eAttach spark plug wire.\u003c\/li\u003e\n\u003cli\u003ePlace engine ON\/OFF switch in ON position.\u003c\/li\u003e\n\u003cli\u003eMove choke to the \"no choke\" position.\u003c\/li\u003e\n\u003cli\u003eMove fuel valve lever to the \"open\" position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eNo or Low Pressure (initial use)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLower water supply.\u003c\/li\u003e\n\u003cli\u003eLeak at high pressure hose fitting.\u003c\/li\u003e\n\u003cli\u003eWater filter screen clogged.\u003c\/li\u003e\n\u003cli\u003eAir in hose.\u003c\/li\u003e\n\u003cli\u003eChoke lever in the \"choke\" position.\u003c\/li\u003e\n\u003cli\u003eThrottle control lever is hot in the \"fast\" position.\u003c\/li\u003e\n\u003cli\u003eHigh pressure water hose is too long.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWater supply must be at least 5.0 gal\/min.\u003c\/li\u003e\n\u003cli\u003eTighten the pressure hose. Apply sealant tape if necessary.\u003c\/li\u003e\n\u003cli\u003eRemove and clean filter.\u003c\/li\u003e\n\u003cli\u003eTurn off the engine, then the water source. Disconnect the water from the pump inlet and turn the water source on to remove all air from the hose. When there is a steady stream of water present, turn water source off.\u003c\/li\u003e\n\u003cli\u003eMove choke to the \"no choke\" position.\u003c\/li\u003e\n\u003cli\u003eMove throttle control lever to the \"fast\" position.\u003c\/li\u003e\n\u003cli\u003eUse high pressure water hose under 50 feet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eWill not draw chemicals.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChemical filter clogged.\u003c\/li\u003e\n\u003cli\u003eChemical screen not in chemical.\u003c\/li\u003e\n\u003cli\u003eChemical too thick.\u003c\/li\u003e\n\u003cli\u003ePressure hose too long.\u003c\/li\u003e\n\u003cli\u003eChemical build up in chemical injector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean filter.\u003c\/li\u003e\n\u003cli\u003eEnsure end of chemical hose is fully submerged into the chemical.\u003c\/li\u003e\n\u003cli\u003eDilute chemical. Chemicals should be the same consistency as water.\u003c\/li\u003e\n\u003cli\u003eLengthen the water supply hose instead of high pressure water hose.\u003c\/li\u003e\n\u003cli\u003eHave parts cleaned or replaced.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eNo or low pressure (after period of normal use)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorn seals of packing.\u003c\/li\u003e\n\u003cli\u003eWorn or obstructed valves.\u003c\/li\u003e\n\u003cli\u003eWorn unloader piston.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and Replace.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eWater leaking at gun\/lance connection.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorn or broken o-ring.\u003c\/li\u003e\n\u003cli\u003eLoose hose connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace o-ring\u003c\/li\u003e\n\u003cli\u003eThighten hose connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem \u003c\/b\u003e\u003cspan\u003eOil leaking at pump.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOil seals worn.\u003c\/li\u003e\n\u003cli\u003eLoose oil drain plug.\u003c\/li\u003e\n\u003cli\u003eWorn oil drain plug o-ring.\u003c\/li\u003e\n\u003cli\u003eWorn filter plug o-ring.\u003c\/li\u003e\n\u003cli\u003ePump Overfilled.\u003c\/li\u003e\n\u003cli\u003eIncorrect oil used.\u003c\/li\u003e\n\u003cli\u003eVent plug is clogged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace any prken parts.\u003c\/li\u003e\n\u003cli\u003eThighten loose connections.\u003c\/li\u003e\n\u003cli\u003eCheck for correct amount of oil.\u003c\/li\u003e\n\u003cli\u003eDrain and fill with correct amount and tpe of oil.\u003c\/li\u003e\n\u003cli\u003eClean vent plug, below air through it to remove any blockage. If problem persists. replace plug.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scrubio Cleaning","offers":[{"title":"Default Title","offer_id":52725037367569,"sku":null,"price":13499.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/2358\/7857\/files\/6_a1328792-bb0a-47bf-9787-cb5faf130550.png?v=1763085816"},{"product_id":"pressure-washer-20-7-l-min-3500psi-10-hp-diesel","title":"Pressure Washer, 20.7 L\/min, 3500Psi, 10 HP Diesel","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA 10 Horsepower Diesel high-pressure washer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e10HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFuel:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDiesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRevolutions:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e3200RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax. Pressure:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e240 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e20.7 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUsage:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine must be switched off when not in use. If the gun is released and the pump enters its unloading state, the machine can only facilitate this for 30 seconds before the water starts overheating and ultimately damaging the pump. If any damage comes to the pump from deformation or destruction of internal components, overheating is the likely cause.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine comes with a \u003c\/span\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11131R\"\u003eRed Gun\u003c\/a\u003e\u003cspan\u003e, a 7m 280bar high-pressure hose, a short hose, a low-pressure chemical injector, and the following nozzles:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139R\"\u003eRed nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139Y\"\u003eYellow nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139W\"\u003eWhite nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139K\"\u003eBlack nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139G\"\u003eGreen nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIMPORTANT SAFETY INSTRUCTIONS\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eRead Operation manual. Do not operate equipment until you have read operation manual for safety, assembly, operation, and maintenance instructions.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF FIRE OR EXPLOSION.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eSpoiled gasoline and it's vapors can become ignited from cigarette sparks, electrical arcing, exhaust gases, and hot engine components suck as the silencer.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShut off the engine and allow it to cool before adding fuel tank.\u003c\/li\u003e\n\u003cli\u003eUse care in filling tank to avoid spilling fuel.\u003c\/li\u003e\n\u003cli\u003eMove washer pump away from fueling area before starting the engine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eHeat will expand fuel in the tank which could result in a fire.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep maximum fuel level 1\/2 below top of tank to allow for expansion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eOperating the washer pump in an explosive environment could result in a fire.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperate and fuel equipment in well ventilated zones free from obstructions. Equipped zones with fire extinguisher suitable for gasoline fires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eMaterials placed against or near the washer pump can interfere with its proper ventilation causing overheating and possible ignition of the materials.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNever operate washer pump in an area containing dry brush or weeds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eSilencer exhaust heat can damage painted surfaces, melt any material sensitive to heat and damage plants.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways keep washer pump a minimum of five feet away from surfaces that could be damaged from muffler exhaust heat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eImproperly stored fuel could lead to accidental ignition. Improperly secured fuel could get into the hands of children or other unqualified people.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStore fuel in an approved container in a secure location away from work area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eUse of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO NOT stray flammable liquids.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK TO BREATHING\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eBreathing exhaust fumes will cause serious injury even death.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperate washer pump in well ventilated area.\u003c\/li\u003e\n\u003cli\u003eAvoid enclosed areas such as garages, basements, etc.\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eSome cleaning fluids contain substances that could cause injury to skin, eyes, or lungs.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse only cleaning fluids specifically recommended for washer pump. Follow manufactures recommendations. DO NOT use chlorine bleach or any other corrosive compounds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING OR STORING\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eFuel and oil can leak or spill and could result in fire or more breathing hazard, serious injury or death. Fuel or oil leaks will damage carpet, paint, or other surfaces in vehicles or trailers.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf water pump is equipped with a fuel shut-off valve, turn the valve to the off position before transportation to avoid fuel leaks. If washer pump is not equipped with a fuel shut-off valve, drain the fuel from the tank before transportation, only transport fuel in an approved container. Always place washer pump on a protective mat when transporting to protect against damage to vehicle from leaks. Remove washer pump from the vehicle immediately upon arrival at your destination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF HOT SURFACES\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eContact with hot surfaces, such as engines exhaust components, could result in serious burn.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDuring operation, touch only the control surface of the washer pump. Keep children away from the washer pump at all times. They are too young to recognize the hazards of this product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF FLUID INJECTION.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eYour washer pump operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injuries. Leaks caused by loose fittings or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT. See a physician immediately.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNever place hands in front of nozzle.\u003c\/li\u003e\n\u003cli\u003eDirect spray away from self and others.\u003c\/li\u003e\n\u003cli\u003eMake sure hose and fittings are tightened and in good condition. Never hold onto the hose or fittings during operation.\u003c\/li\u003e\n\u003cli\u003eDo not allow hose to contact muffler.\u003c\/li\u003e\n\u003cli\u003eNever attach or remove lance or hose fittings while system is pressurized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eInjuries can result if system pressure is not reduced before attempting maintenance or disassembly.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo relieve system pressure, shut off engine, turn off water supply, and pull gun trigger until water stops flowing.\u003c\/li\u003e\n\u003cli\u003eUse only hose and accessories rated for pressure higher than your washer pump's PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF INJURY FROM SPRAY.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eHigh velocity fluid spray can cause objects to break, propelling particles at high speed.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLight or unsecured objects can become hazardous projectiles.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways wear approved safety glasses.\u003c\/li\u003e\n\u003cli\u003eWear protective clothing to protect against accidental spraying.\u003c\/li\u003e\n\u003cli\u003eNever point lance at people or animals.\u003c\/li\u003e\n\u003cli\u003eAlways secure trigger lock when lance is not in service to prevent accidental operation.\u003c\/li\u003e\n\u003cli\u003eNever permanently secure trigger in open position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF CHEMICAL BURN.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eUse of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO NOT use acids, gasoline, kerosene, or any other flammable materials in this product. Use only household detergents, cleaners and degreaser recommended recommended for use in washer pump\u003c\/li\u003e\n\u003cli\u003eWear protective clothing to protect eyes and skin from contact with sprayed materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF UNSAFE OPERATION.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eUnsafe operations of your washer pump could lead to serious injury or death to you and others.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDO NOT use chlorine bleach or any other corrosive compound.\u003c\/li\u003e\n\u003cli\u003eBecome familiar with the operation and controls of the washer pump.\u003c\/li\u003e\n\u003cli\u003eKeep operating area clear of all persons, pets and obstacles.\u003c\/li\u003e\n\u003cli\u003eDO NOT operate the product when fatigued or under the influence of alcohol or drugs. Stay alert at all times.\u003c\/li\u003e\n\u003cli\u003eNever defeat the safety features of the machine.\u003c\/li\u003e\n\u003cli\u003eDo not operate machine with missing, broke or unauthorized parts.\u003c\/li\u003e\n\u003cli\u003eNever leave lance unattended while unit is running.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eIf proper starting procedure is not followed, engine can kickback, causing serious hand and arm injury.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf engine does not start after two pulls, squeeze trigger of gun to relieve pump pressure, pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kickback and prevent hand or arm injury.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eThe gun\/lance is a powerful cleaning tool that could look like a toy to a child.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep children away from the washer pump at all times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eReactive force of spray will cause gun\/wand to move, and could cause the operator to slip or fall, or misdirect the pray. Improper control of gun\/lance can result in injury to self or others.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not overreach or stand on an unstable support. Grip gun\/lance firmly with both hands. Expect the gun to kick when triggered.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e RISK OF ELECTRICAL SHOCK.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat can happen:\u003c\/b\u003e\u003cspan\u003eSpray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock.\u003c\/span\u003e\u003cbr\u003e\u003cb\u003ePrevention\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWASHER PUMP TERMINOLOGY\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003e\u003cu\u003ePSI:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e POUNDS PER SQUARE INCH, the unit measure for water pressure, also used for air pressure, hydraulic pressure, etc.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eGPM:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e GALLONS PER MINUTE, the unit measure for the flow rate of water.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eBypass Mode:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e In bypass mode, the pump is recirculating water because the trigger of the spray gun is not pulled. If unit is left in bypass mode for more than two minutes.The water pressure will rise to a dangerous level and could damage internal components of the pump. Any damage to pump due to these causes will not be covered under warranty.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDo not allow unit to operate in bypass mode for more than two minutes at any time. Overheating of pump can cause damage to pump.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eThermal Relief Valve:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e In an effort to prevent extreme damage, pumps are equipped with a thermal relief valve. This valve will open the temperature inside the pump rises too high. This valve will then release a gush of water in an effort to lower the temperature inside the pump. Immediately after this occurs, the valve will close.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eChemical Injection System:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e Mixes cleaners or cleaning solvents with the pressurized water to improve cleaning effectiveness.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eWater Supply:\u003c\/u\u003e\u003c\/b\u003e\u003cspan\u003e All pressure washers must have a source of water. The minimum requirement for a water supply is 20PSI and 5 gallon per minute.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWASHER PUMP OPERATING FEATURES.\u003c\/h3\u003e\n\u003ch4\u003ePRESSURE REGULATOR\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eThe pressure setting is preset at the factory to achieve optimum pressure and cleaning.If you need to lower the pressure,it can be accomplished by these methods.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1. \u003c\/span\u003e\u003cb\u003eBack away from the surface to be cleaned.\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eThe further away you are,the less the pressure will be on the surface to be cleaned.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e Do not attempt to increase pump pressure. A higher pressure setting than the factory set pressure may damage pump.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2. \u003c\/span\u003e\u003cb\u003eReduce the speed the gasoline engine (RPM).\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eSlow the engine down and the water pressure will go down with it.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3. \u003c\/span\u003e\u003cb\u003eChange to a nozzle ,\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eThis nozzle delivers a less powerful stream of water and a wider spray pattern.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4.\u003c\/span\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003eAdjust the pressure regulator on the pump .\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eTurn the pressure regulator knob counter-clockwise to lower pressure. Once you have finished using your pressure washer, return the pressure regulator to it's original position by turning it clockwise.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e Do not try to turn pressure regulator knob past the build-in stop or pump may be damaged.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to apply chemicals and cleaning solvents\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e Applying chemicals or cleaning solvents is a low pressure operation.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUse only soaps and chemicals designed for washer pumps, \u003c\/span\u003e\u003cb\u003eDO NOT use bleach\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eHOW TO APPLY CHEMICALS AND CLEANING SOLVENTS:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003ePress chemical hose onto barbed fitting located near the high pressure hose connection of the pump.\u003c\/li\u003e\n\u003cli\u003ePlace other end of chemical hose with filter on it into container holding the chemical solution.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe chemical\/water ratio is 1:7, for every 7 gallons of water pumped, 1 gallon of chemical\/ cleaning solution will be used.\u003c\/li\u003e\n\u003cli\u003eChange to the low pressure nozzle.\u003c\/li\u003e\n\u003cli\u003eAfter use of chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly. If chemicals remain in the pump it could be harmful to the pump. Pumps that are damaged due to chemicals will not be covered under warranty.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eChemicals and soaps will not siphon when lance is in the high pressure setting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWARNINGS\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e When using the high pressure setting, DO NOT allow the high pressure spray to come in contact with unprotected skin, eyes, or with any animals. Serious injury can occur.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYour washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injuries. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. \u003c\/span\u003e\u003cb\u003eDO NOT TREAT FLUID INJECTION AS A SIMPLE CUT. See a physician immediately.\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e NEVER fill fuel tank when engine is running or hot. DO NOT smoke when filling the fuel tank.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER fill the fuel tank completely. Fill the tank to 1\/2\" below the bottom of the filter neck to provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, and odorless and deadly gas.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER let hoses come in contact with very hot engine muffler during or immediately after use of your washer pump. Damage to hoses from the contact with hot engine surfaces will NOT be covered by warranty.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER pull water supply from hose to move washer pump. This could damage hose and pump inlet.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER use hot water. COLD WATER ONLY.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNEVER turn water supply while washer pump engine is running or damage to pump will result.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDO NOT STOP spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes internal components of the pump can be damaged.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eSTARTING\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePrior to starting, refer to your engine manual for proper starting procedures for your engine type.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eIn a well ventilated outdoor area add fresh, high quality, unleaded gasoline with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled fuel before starting the engine.\u003c\/li\u003e\n\u003cli\u003eCheck engine oil level.\u003c\/li\u003e\n\u003cli\u003eConnect water source to pump inlet. Water source must provide a minimum of 5 gallons at 20PSI.\u003c\/li\u003e\n\u003cli\u003eConnect high pressure water hose to pump outlet.\u003c\/li\u003e\n\u003cli\u003eTurn on water source. Failure to do so can cause damage to the pump.\u003c\/li\u003e\n\u003cli\u003eStart engine. If the engine does not start after two pulls, pull the trigger on the gun to relieve the pressure.\u003c\/li\u003e\n\u003cli\u003eDepress trigger on gun to start water flow. Stand on a stable surface and grip gun with both hands. Expect the gun to kick when triggered.\u003c\/li\u003e\n\u003cli\u003eRelease trigger to stop water flow.\u003c\/li\u003e\n\u003cli\u003eAdjust spray for the task being performed be changing nozzle.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSHUTTING DOWN\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eAfter each use, if you have a[plied chemicals, place chemical hose into the container op clean water and draw clean water through chemical injection system to rinse system thoroughly. Failure to do so could cause damage to the pump.\u003c\/li\u003e\n\u003cli\u003eTurn engine off. NEVER turn the water off with the engine running.\u003c\/li\u003e\n\u003cli\u003eTurn off the water source.\u003c\/li\u003e\n\u003cli\u003ePull the trigger on the spray gun to relieve any water pressure in hose or gun.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eMAINTENANCE\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e When performing maintenance, you may be exposed to hot surfaces, water pressure, or moving parts that can cause serious injury or death.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBefore performing any maintenance or repair, disconnect spark plug wire, let engine cool and release all water pressure. The engine contains flammable fuel.DO NOT SMOKE or work near open flames while performing maintenance.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo ensure efficient operation and longer life of your washer pump, a routine maintenance schedule should be prepared and followed. If the washer pump is used in unusual conditions, such as high-temperature or dusty conditions, more frequent maintenance checks will be required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eTO CHECK OIL\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eRemove oil inlet plug from pump and wipe clean.\u003c\/li\u003e\n\u003cli\u003eInsert oil inlet plug fully into pump, then remove it.\u003c\/li\u003e\n\u003cli\u003eoil level is correct when oil covers the lower 1\/2 inch of end of oil inlet plug.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eHOW TO CHANGE PUMP OIL\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eLoosen oil inlet plug.\u003c\/li\u003e\n\u003cli\u003ePlace a container under the oil drain plug.\u003c\/li\u003e\n\u003cli\u003eRemove oil drain plug.\u003c\/li\u003e\n\u003cli\u003eAfter oil is drained replace oil drain plug tighten securely.\u003c\/li\u003e\n\u003cli\u003eRemove oil inlet plug and fill with recommended oil.\u003c\/li\u003e\n\u003cli\u003eReplace oil inlet plug and tighten securely.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eHOW TO CLEAN INLET WATER FILTER\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eThis screen filter should be checked periodically and cleaned if necessary.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove filter by grasping end and removing it from water inlet of pump as shown.\u003c\/li\u003e\n\u003cli\u003eClean filter by flushing it with water on both sides.\u003c\/li\u003e\n\u003cli\u003eRe-inserting filter into water inlet pump.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003eNote\u003c\/b\u003e\u003cspan\u003e Cone side faces out.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote\u003c\/b\u003e\u003cspan\u003e Do not operate pressure washer without filter properly installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eSTORAGE\u003c\/h3\u003e\n\u003ch4\u003ePUMP\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eDrain all water from high pressure water hose, coil it, and store it in cradle of the washer pump handle.\u003c\/li\u003e\n\u003cli\u003eDrain all water from gun and lance by holding gun in vertical position with nozzle end pointing down and squeezing trigger. Store in gun\/hose holder.\u003c\/li\u003e\n\u003cli\u003eStore chemical hose, high pressure water hose, so they are protected from damage, such as being run over.\u003cbr\u003e\u003cbr\u003eIt is recommended that you follow these steps to protect the internal seals of the washer pump when storing the unit for more than 30 days and\/or when freezing temperatures are expected.\u003c\/li\u003e\n\u003cli\u003eObtain a funnel, six ounces of RV antifreeze, and approximately 36 inches of garden hose with a male connector attached to one end.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cb\u003eCAUTION\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eUse only RV antifreeze. Any other antifreeze is corrosive and can damage pump.\u003c\/li\u003e\n\u003cli\u003eDisconnect spark plug wire.\u003c\/li\u003e\n\u003cli\u003eConnect the hose to water inlet of pump.\u003c\/li\u003e\n\u003cli\u003eAdd RV antifreeze to hose.\u003c\/li\u003e\n\u003cli\u003ePull engine starter rope slowly several time, until antifreeze comes out of high pressure water hose connection of pump.\u003c\/li\u003e\n\u003cli\u003eRemove short hose from water inlet of pump.\u003c\/li\u003e\n\u003cli\u003eReconnect spark plug wire.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTROUBLESHOOTING GUIDE\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eEngine will not start\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo fuel.\u003c\/li\u003e\n\u003cli\u003eNo oil.\u003c\/li\u003e\n\u003cli\u003ePressure builds up after two pulls on the recoil starter or after initial use.\u003c\/li\u003e\n\u003cli\u003eChoke lever in the \"no choke\" position.\u003c\/li\u003e\n\u003cli\u003eSpark plug wire not attached.\u003c\/li\u003e\n\u003cli\u003eEngine ON\/OFF position.\u003c\/li\u003e\n\u003cli\u003eChoke lever in the \"choke\" position on a \"hot\" engine or an engine that has been exposed to thermal heat for a long period of time.\u003c\/li\u003e\n\u003cli\u003eFuel valve id closed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd Fuel.\u003c\/li\u003e\n\u003cli\u003eAdd required amount of oil.\u003c\/li\u003e\n\u003cli\u003eSqueeze gun trigger to relieve pressure.\u003c\/li\u003e\n\u003cli\u003eMove choke to the \"choke\" position.\u003c\/li\u003e\n\u003cli\u003eAttach spark plug wire.\u003c\/li\u003e\n\u003cli\u003ePlace engine ON\/OFF switch in ON position.\u003c\/li\u003e\n\u003cli\u003eMove choke to the \"no choke\" position.\u003c\/li\u003e\n\u003cli\u003eMove fuel valve lever to the \"open\" position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eNo or Low Pressure (initial use)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLower water supply.\u003c\/li\u003e\n\u003cli\u003eLeak at high pressure hose fitting.\u003c\/li\u003e\n\u003cli\u003eWater filter screen clogged.\u003c\/li\u003e\n\u003cli\u003eAir in hose.\u003c\/li\u003e\n\u003cli\u003eChoke lever in the \"choke\" position.\u003c\/li\u003e\n\u003cli\u003eThrottle control lever is hot in the \"fast\" position.\u003c\/li\u003e\n\u003cli\u003eHigh pressure water hose is too long.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWater supply must be at least 5.0 gal\/min.\u003c\/li\u003e\n\u003cli\u003eTighten the pressure hose. Apply sealant tape if necessary.\u003c\/li\u003e\n\u003cli\u003eRemove and clean filter.\u003c\/li\u003e\n\u003cli\u003eTurn off the engine, then the water source. Disconnect the water from the pump inlet and turn the water source on to remove all air from the hose. When there is a steady stream of water present, turn water source off.\u003c\/li\u003e\n\u003cli\u003eMove choke to the \"no choke\" position.\u003c\/li\u003e\n\u003cli\u003eMove throttle control lever to the \"fast\" position.\u003c\/li\u003e\n\u003cli\u003eUse high pressure water hose under 50 feet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eWill not draw chemicals.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChemical filter clogged.\u003c\/li\u003e\n\u003cli\u003eChemical screen not in chemical.\u003c\/li\u003e\n\u003cli\u003eChemical too thick.\u003c\/li\u003e\n\u003cli\u003ePressure hose too long.\u003c\/li\u003e\n\u003cli\u003eChemical build up in chemical injector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean filter.\u003c\/li\u003e\n\u003cli\u003eEnsure end of chemical hose is fully submerged into the chemical.\u003c\/li\u003e\n\u003cli\u003eDilute chemical. Chemicals should be the same consistency as water.\u003c\/li\u003e\n\u003cli\u003eLengthen the water supply hose instead of high pressure water hose.\u003c\/li\u003e\n\u003cli\u003eHave parts cleaned or replaced.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eNo or low pressure (after period of normal use)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorn seals of packing.\u003c\/li\u003e\n\u003cli\u003eWorn or obstructed valves.\u003c\/li\u003e\n\u003cli\u003eWorn unloader piston.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and Replace.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem\u003c\/b\u003e\u003cspan\u003eWater leaking at gun\/lance connection.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorn or broken o-ring.\u003c\/li\u003e\n\u003cli\u003eLoose hose connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace o-ring\u003c\/li\u003e\n\u003cli\u003eThighten hose connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eProblem \u003c\/b\u003e\u003cspan\u003eOil leaking at pump.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCause:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOil seals worn.\u003c\/li\u003e\n\u003cli\u003eLoose oil drain plug.\u003c\/li\u003e\n\u003cli\u003eWorn oil drain plug o-ring.\u003c\/li\u003e\n\u003cli\u003eWorn filter plug o-ring.\u003c\/li\u003e\n\u003cli\u003ePump Overfilled.\u003c\/li\u003e\n\u003cli\u003eIncorrect oil used.\u003c\/li\u003e\n\u003cli\u003eVent plug is clogged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCorrection:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and replace any prken parts.\u003c\/li\u003e\n\u003cli\u003eThighten loose connections.\u003c\/li\u003e\n\u003cli\u003eCheck for correct amount of oil.\u003c\/li\u003e\n\u003cli\u003eDrain and fill with correct amount and tpe of oil.\u003c\/li\u003e\n\u003cli\u003eClean vent plug, below air through it to remove any blockage. If problem persists. replace plug.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scrubio Cleaning","offers":[{"title":"Default Title","offer_id":52725050278161,"sku":null,"price":19999.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/2358\/7857\/files\/7_e8434e8f-7928-4afd-9dda-72b3adeb6916.png?v=1763085985"},{"product_id":"pressure-washer-11-l-min-220v-2-5kw-1200psi","title":"Pressure Washer 11 L\/min 220V 2.5kW, 1200Psi","description":"\u003cp\u003e\u003cspan\u003eA 2.5KW 220V high-pressure washer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e\u003cspan\u003e 2.5KW\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ePower: Electric\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRevolutions:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e1200\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax. Pressure:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e160 Bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e11L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUsage:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe machine must be switched off when not in use. If the gun is released and the pump enters its unloading state, the machine can only facilitate this for 30 seconds before the water starts overheating and ultimately damaging the pump. If any damage comes to the pump from deformation or destruction of internal components, overheating is the likely cause.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139R\"\u003eRed nozzle\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139Y\"\u003eYellow nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139W\"\u003eWhite nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139K\"\u003eBlack nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.semca.co.za\/product\/product.php?p=11139G\"\u003eGreen nozzle\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scrubio Cleaning","offers":[{"title":"Default Title","offer_id":53115546206481,"sku":null,"price":4999.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/2358\/7857\/files\/Screenshot2026-02-10at19.00.41.png?v=1770742914"}],"url":"https:\/\/scrubiocleaning.com\/collections\/pressure-washers.oembed","provider":"Scrubio Cleaning","version":"1.0","type":"link"}